On Tue, Jan 15, 2019 at 2:54 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Using the batch API from the interconnect driver sometimes leads to a
> KASAN error due to an access to freed memory. This is easier to trigger
> with threadirqs on the kernel commandline.
>
> BUG: KASAN: use-after-free in rpmh_tx_done+0x114/0x12c
> Read of size 1 at addr fffffff51414ad84 by task irq/110-apps_rs/57
>
> CPU: 0 PID: 57 Comm: irq/110-apps_rs Tainted: G W 4.19.10 #72
> Call trace:
> dump_backtrace+0x0/0x2f8
> show_stack+0x20/0x2c
> __dump_stack+0x20/0x28
> dump_stack+0xcc/0x10c
> print_address_description+0x74/0x240
> kasan_report+0x250/0x26c
> __asan_report_load1_noabort+0x20/0x2c
> rpmh_tx_done+0x114/0x12c
> tcs_tx_done+0x450/0x768
> irq_forced_thread_fn+0x58/0x9c
> irq_thread+0x120/0x1dc
> kthread+0x248/0x260
> ret_from_fork+0x10/0x18
>
> Allocated by task 385:
> kasan_kmalloc+0xac/0x148
> __kmalloc+0x170/0x1e4
> rpmh_write_batch+0x174/0x540
> qcom_icc_set+0x8dc/0x9ac
> icc_set+0x288/0x2e8
> a6xx_gmu_stop+0x320/0x3c0
> a6xx_pm_suspend+0x108/0x124
> adreno_suspend+0x50/0x60
> pm_generic_runtime_suspend+0x60/0x78
> __rpm_callback+0x214/0x32c
> rpm_callback+0x54/0x184
> rpm_suspend+0x3f8/0xa90
> pm_runtime_work+0xb4/0x178
> process_one_work+0x544/0xbc0
> worker_thread+0x514/0x7d0
> kthread+0x248/0x260
> ret_from_fork+0x10/0x18
>
> Freed by task 385:
> __kasan_slab_free+0x12c/0x1e0
> kasan_slab_free+0x10/0x1c
> kfree+0x134/0x588
> rpmh_write_batch+0x49c/0x540
> qcom_icc_set+0x8dc/0x9ac
> icc_set+0x288/0x2e8
> a6xx_gmu_stop+0x320/0x3c0
> a6xx_pm_suspend+0x108/0x124
> adreno_suspend+0x50/0x60
> cr50_spi spi5.0: SPI transfer timed out
> pm_generic_runtime_suspend+0x60/0x78
> __rpm_callback+0x214/0x32c
> rpm_callback+0x54/0x184
> rpm_suspend+0x3f8/0xa90
> pm_runtime_work+0xb4/0x178
> process_one_work+0x544/0xbc0
> worker_thread+0x514/0x7d0
> kthread+0x248/0x260
> ret_from_fork+0x10/0x18
>
> The buggy address belongs to the object at fffffff51414ac80
> which belongs to the cache kmalloc-512 of size 512
> The buggy address is located 260 bytes inside of
> 512-byte region [fffffff51414ac80, fffffff51414ae80)
> The buggy address belongs to the page:
> page:ffffffbfd4505200 count:1 mapcount:0 mapping:fffffff51e00c680 index:0x0 compound_mapcount: 0
> flags: 0x4000000000008100(slab|head)
> raw: 4000000000008100 ffffffbfd4529008 ffffffbfd44f9208 fffffff51e00c680
> raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
> page dumped because: kasan: bad access detected
>
> Memory state around the buggy address:
> fffffff51414ac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> fffffff51414ad00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> >fffffff51414ad80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ^
> fffffff51414ae00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> fffffff51414ae80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>
> The batch API sets the same completion for each rpmh message that's sent
> and then loops through all the messages and waits for that single
> completion declared on the stack to be completed before returning from
> the function and freeing the message structures. Unfortunately, some
> messages may still be in process and 'stuck' in the TCS. At some later
> point, the tcs_tx_done() interrupt will run and try to process messages
> that have already been freed at the end of rpmh_write_batch(). This will
> in turn access the 'needs_free' member of the rpmh_request structure and
> cause KASAN to complain. Furthermore, if there's a message that's
> completed in rpmh_tx_done() and freed immediately after the complete()
> call is made we'll be racing with potentially freed memory when
> accessing the 'needs_free' member:
>
> CPU0 CPU1
> ---- ----
> rpmh_tx_done()
> complete(&compl)
> wait_for_completion(&compl)
> kfree(rpm_msg)
> if (rpm_msg->needs_free)
> <KASAN warning splat>
>
> Let's fix this by allocating a chunk of completions for each message and
> waiting for all of them to be completed before returning from the batch
> API. Alternatively, we could wait for the last message in the batch, but
> that may be a more complicated change because it looks like
> tcs_tx_done() just iterates through the indices of the queue and
> completes each message instead of tracking the last inserted message and
> completing that first.
>
> Cc: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> Cc: "Raju P.L.S.S.S.N" <rplsssn@xxxxxxxxxxxxxx>
> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Cc: Evan Green <evgreen@xxxxxxxxxxxx>
> Fixes: c8790cb6da58 ("drivers: qcom: rpmh: add support for batch RPMH request")
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> ---
>
> Changes from v1:
> * Incorporated needs_free check earlier
> * Simplified logic to no longer flush everything out on failure
>
> drivers/soc/qcom/rpmh.c | 34 +++++++++++++++++++++-------------
> 1 file changed, 21 insertions(+), 13 deletions(-)
>
Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
