Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 17, 2019 at 09:21:09AM -0800, Matthias Kaehlcke wrote:

> I observed that the qcom_geni_serial driver doesn't raise RTS with
> flow control disabled. It seems we have to investigate why that's the
> case. I agree that the driver should be platform agnostic.

Sounds like a driver bug, unless the hardware is just "odd". The
driver implementation of this looks very non-standard judging from a
quick peek.

In fact, qcom_geni_serial_get_mctrl() is currently a no-op if hardware
flow control is not enabled:

	if (uart_console(uport) || !uart_cts_enabled(uport))
		return;

Perhaps dropping the !uart_cts_enabled() test is sufficient.

Johan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux