On 11-01-19, 11:58, Matthias Kaehlcke wrote:
> On Fri, Jan 11, 2019 at 09:16:53AM +0530, Viresh Kumar wrote:
> Just to gain a better understanding: is cpuidle cooling already
> available for arm64 (or is there a patch set)? I came across the
> relatively new idle injecting framework but it seems currently the
> only user is the Intel powerclamp driver.
Daniel was trying to upstream it earlier:
lore.kernel.org/lkml/1522945005-7165-7-git-send-email-daniel.lezcano@xxxxxxxxxx
> > > even though only one will be active at any given
> > > time. However I wonder if we could change this:
> >
> > I won't say it that way. I see it as all the CPUs are active during a
> > cooling state, i.e. they are all participating.
>
> agreed, I was referring to the CPU cooling device, which (without
> cpuidle injection) could be considered a single device per freq domain.
Even without cpuidle injection all CPUs actually take part in cooling.
> > > For device tree based platform the above implies that cooling maps
> > > must include a list of all possible cooling devices of a frequency
> > > domain, even though only one of them will exist at any given time.
> > >
> > > For example:
> > >
> > > cooling-maps {
> > > map0 {
> > > trip = <&cpu_alert0>;
> > > cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
> > > <&CPU1 THERMAL_NO_LIMIT 4>,
> > > <&CPU2 THERMAL_NO_LIMIT 4>,
> > > <&CPU3 THERMAL_NO_LIMIT 4>;
> > > };
> > > map1 {
> > > trip = <&cpu_crit0>;
> > > cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> >
> > This is the right thing to do hardware description wise, no matter
> > what the kernel does.
>
> Not sure I would call it a hardware description. I'd say we pretend
> the thermal configuration is a hardware description so the DT folks
> don't yell at us ;-) IMO a CPU cooling device is an abstraction, I
> think there is no such IP block on most systems.
Right.
> It seems with cpuidle injection CPUs can perform cooling actions
> individually, with that I agree that representing them as individual
> cooling devices in the DT makes sense. Without that a cooling device
> per freq domain would seem a resonable abstraction.
But we actually have 4 different cooling devices no matter what. The only thing
is that they switch their cooling state together. And that shouldn't bother DT
is what I thought :)
> One of the reasons I dislike the above list of cooling devices is that
> it is repeated for different thermal-zone/cooling-maps, but I guess
> we have to live with that, would be nice if the DT would allow to do
> something like this:
>
> thermal-zones {
> cooling_maps_fd0 : cooling-maps {
> map0 {
> trip = <&cpu_alert0>;
> cooling-device = <&CPU0 THERMAL_NO_LIMIT 4>,
> <&CPU1 THERMAL_NO_LIMIT 4>,
> <&CPU2 THERMAL_NO_LIMIT 4>,
> <&CPU3 THERMAL_NO_LIMIT 4>;
> };
> map1 {
> trip = <&cpu_crit0>;
> cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> };
>
> cpu0-thermal {
> ...
> cooling-maps = @cooling_maps_fd0;
> ...
> };
>
> cpu1-thermal {
> ...
> cooling-maps = @cooling_maps_fd0;
> ...
> };
>
> ...
> };
Yeah, maybe. There aren't lot of examples of such duplication though if I
remember correctly.
--
viresh
