Add DT bindings to describe the rpm/rpmh power domains found on Qualcomm
Technologies, Inc. SoCs. These power domains communicate a performance
state to RPM/RPMh, which then translates it into corresponding voltage on a
PMIC rail.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/power/qcom,rpmpd.txt | 145 ++++++++++++++++++
include/dt-bindings/power/qcom-rpmpd.h | 39 +++++
2 files changed, 184 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
new file mode 100644
index 000000000000..2f0764298d86
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
@@ -0,0 +1,145 @@
+Qualcomm RPM/RPMh Power domains
+
+For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
+which then translates it into a corresponding voltage on a rail
+
+Required Properties:
+ - compatible: Should be one of the following
+ * qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
+ * qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
+ - #power-domain-cells: number of cells in Power domain specifier
+ must be 1.
+ - operating-points-v2: Phandle to the OPP table for the Power domain.
+ Refer to Documentation/devicetree/bindings/power/power_domain.txt
+ and Documentation/devicetree/bindings/opp/opp-level.txt for more details
+
+Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
+various OPPs for different platforms as well as Power domain indexes
+
+Example: rpmh power domain controller and OPP table
+
+#include <dt-bindings/power/qcom-rpmhpd.h>
+
+opp-level values specified in the OPP tables for RPMh power domains
+should use the RPMH_REGULATOR_LEVEL_* constants from
+<dt-bindings/power/qcom-rpmhpd.h>
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdm845-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2-level";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
+
+Example: rpm power domain controller and OPP table
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2-level";
+
+ rpmpd_opp_low: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp_ret: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp_svs: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp_normal: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp_high: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp_turbo: opp6 {
+ opp-level = <6>;
+ };
+ };
+ };
+
+Example: Client/Consumer device using OPP table
+
+ leaky-device0@12350000 {
+ compatible = "foo,i-leak-current";
+ reg = <0x12350000 0x1000>;
+ power-domains = <&rpmhpd SDM845_MX>;
+ operating-points-v2 = <&leaky_opp_table>;
+ };
+
+
+ leaky_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp1 {
+ opp-hz = /bits/ 64 <144000>;
+ required-opps = <&rpmhpd_opp_low>;
+ };
+
+ opp2 {
+ opp-hz = /bits/ 64 <400000>;
+ required-opps = <&rpmhpd_opp_ret>;
+ };
+
+ opp3 {
+ opp-hz = /bits/ 64 <20000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp4 {
+ opp-hz = /bits/ 64 <25000000>;
+ required-opps = <&rpmpd_opp_normal>;
+ };
+ };
diff --git a/include/dt-bindings/power/qcom-rpmpd.h b/include/dt-bindings/power/qcom-rpmpd.h
new file mode 100644
index 000000000000..87d9c6611682
--- /dev/null
+++ b/include/dt-bindings/power/qcom-rpmpd.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
+
+#ifndef _DT_BINDINGS_POWER_QCOM_RPMPD_H
+#define _DT_BINDINGS_POWER_QCOM_RPMPD_H
+
+/* SDM845 Power Domain Indexes */
+#define SDM845_EBI 0
+#define SDM845_MX 1
+#define SDM845_MX_AO 2
+#define SDM845_CX 3
+#define SDM845_CX_AO 4
+#define SDM845_LMX 5
+#define SDM845_LCX 6
+#define SDM845_GFX 7
+#define SDM845_MSS 8
+
+/* SDM845 Power Domain performance levels */
+#define RPMH_REGULATOR_LEVEL_RETENTION 16
+#define RPMH_REGULATOR_LEVEL_MIN_SVS 48
+#define RPMH_REGULATOR_LEVEL_LOW_SVS 64
+#define RPMH_REGULATOR_LEVEL_SVS 128
+#define RPMH_REGULATOR_LEVEL_SVS_L1 192
+#define RPMH_REGULATOR_LEVEL_NOM 256
+#define RPMH_REGULATOR_LEVEL_NOM_L1 320
+#define RPMH_REGULATOR_LEVEL_NOM_L2 336
+#define RPMH_REGULATOR_LEVEL_TURBO 384
+#define RPMH_REGULATOR_LEVEL_TURBO_L1 416
+
+/* MSM8996 Power Domain Indexes */
+#define MSM8996_VDDCX 0
+#define MSM8996_VDDCX_AO 1
+#define MSM8996_VDDCX_VFC 2
+#define MSM8996_VDDMX 3
+#define MSM8996_VDDMX_AO 4
+#define MSM8996_VDDSSCX 5
+#define MSM8996_VDDSSCX_VFC 6
+
+#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
