Add 'xo_board' as ref clock for the DSI PHYs, it was previously hardcoded in the PLL 'driver' for the 28nm PHY. Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> --- Changes in v5: - none Changes in v4: - added 'Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>' tag Changes in v3: - added 'Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>' tag Changes in v2: - patch added to the series --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index d302d8d639a12..89f30f34ff896 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -959,8 +959,9 @@ #clock-cells = <1>; #phy-cells = <0>; - clocks = <&gcc GCC_MDSS_AHB_CLK>; - clock-names = "iface"; + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; }; }; -- 2.20.1.415.g653613c723-goog
