Re: [PATCH v7 6/6] arm64: dts: sdm845: Add gpu and gmu device nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Dec 18, 2018 at 10:33 AM Jordan Crouse <jcrouse@xxxxxxxxxxxxxx> wrote:
>
> Add the nodes to describe the Adreno GPU and GMU devices.
>
> Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
> ---
>
> v7: Updated the GMU compatible string and removed interrupt-names
>
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 122 +++++++++++++++++++++++++++
>  1 file changed, 122 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 233a5898ebc2..4779014e4a05 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/reset/qcom,sdm845-aoss.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> @@ -1349,6 +1350,127 @@
>                         };
>                 };
>
> +
> +               gpu@5000000 {

Repeating my comments from v6:

nit that you're adding an extra blank line here that you don't need.
Given the quantity of outstanding dts patches though, it's almost
certain that Andy will need to manually resolve conflicts when
applying this patch so presumably he can fix up when he lands.

In any case, feel free to add:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Tested-by: Douglas Anderson <dianders@xxxxxxxxxxxx>


> +                       compatible = "qcom,adreno-630.2", "qcom,adreno";
> +                       #stream-id-cells = <16>;
> +
> +                       reg = <0x5000000 0x40000>, <0x509e000 0x10>;
> +                       reg-names = "kgsl_3d0_reg_memory", "cx_mem";
> +
> +                       /*
> +                        * Look ma, no clocks! The GPU clocks and power are
> +                        * controlled entirely by the GMU
> +                        */
> +
> +                       interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                       iommus = <&adreno_smmu 0>;
> +
> +                       operating-points-v2 = <&gpu_opp_table>;
> +
> +                       qcom,gmu = <&gmu>;
> +
> +                       gpu_opp_table: opp-table {
> +                               compatible = "operating-points-v2-qcom-level";

I believe that the consensus from the v2 comments at
<https://patchwork.kernel.org/patch/10727121/> are that this should
be:

compatible = "operating-points-v2-qcom-level", "operating-points-v2";

...same with the other one below...



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux