Re: [PATCH v13 1/2] dt-bindings: cpufreq: Introduce QCOM CPUFREQ Firmware bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2018-12-13 20:10:23)
> Add QCOM cpufreq firmware device bindings for Qualcomm Technology Inc's
> SoCs. This is required for managing the cpu frequency transitions which are
> controlled by the hardware engine.
> 
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>

except one question below for Rob.

> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> new file mode 100644
> index 0000000..33856947
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
> @@ -0,0 +1,172 @@
> +Qualcomm Technologies, Inc. CPUFREQ Bindings
> +
> +CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
> +SoCs to manage frequency in hardware. It is capable of controlling frequency
> +for multiple clusters.
> +
> +Properties:
> +- compatible
> +       Usage:          required
> +       Value type:     <string>
> +       Definition:     must be "qcom,cpufreq-hw".
> +
> +- clocks
> +       Usage:          required
> +       Value type:     <phandle> From common clock binding.
> +       Definition:     clock handle for XO clock and GPLL0 clock.
> +
> +- clock-names
> +       Usage:          required
> +       Value type:     <string> From common clock binding.
> +       Definition:     must be "xo", "alternate".
> +
> +- reg
> +       Usage:          required
> +       Value type:     <prop-encoded-array>
> +       Definition:     Addresses and sizes for the memory of the HW bases in
> +                       each frequency domain.
> +- reg-names
> +       Usage:          Optional
> +       Value type:     <string>
> +       Definition:     Frequency domain name i.e.
> +                       "freq-domain0", "freq-domain1".
> +
> +- #freq-domain-cells:

I still wonder if this should be #qcom,freq-domain-cells, but if Rob is
OK I won't complain.

> +       Usage:          required.

Nitpick: Weird full-stop here     ^

> +       Definition:     Number of cells in a freqency domain specifier.
> +
> +* Property qcom,freq-domain
> +Devices supporting freq-domain must set their "qcom,freq-domain" property with
> +phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
> +
> +




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux