Changes in v6: * OPP binding updates for qcom,level reviewed by Rob * DT bindings for rpmpd and rpmhpd updated to specify the OPP tables as child nodes of the power-controller itself * Removed some module specific remains from the drivers, now that they can only be built-in * Added a simple_opp_to_performance_state() helper Changes in v5: * First 6 patches are unchanged * Patch 7/8 adds the DT node for rpmh power-controller on sdm845 and the corresponding OPP tables for it to describe the performance states * Patch 8/8 adds a parent/child relationship across mx/cx and mx_ao/cx_ao as needed on sdm845 platform. This patch is dependent on the series from Viresh [1] which adds support to propogate performance states across the power domain hierarchy which is still being reviewed Changes in v4: * Included the patch to add qcom-opp bindings (dropped accidentally in v3) * merged the patches to add bindings for rpm and rpmh, added consumer binding example * Made the drivers built in, removed .remove * Added better description in changelog for PATCH 6/6 * Updated rpmhpd_aggregate_corner() based on Davids feedback * rpmhpd_set_performance_state() returns max corner, in cases where its called with an INT_MAX * Dropped the patch to max vote on all corners at init, the patch did not work anyway, and it shouldn't be needed now Changes in v3: * Bindings split into seperate patches * Bindings updated to remove duplicate OPP table phandles * DT headers defining macros for Power domain indexes and OPP levels * Optimisations to use rpmh_write_async() whereever applicable * Fixed up handling of ACTIVE_ONLY/WAKE_ONLY/SLEEP voting for RPMh * Fixed the vlvl to hlvl conversions in set_performance * Other minor fixes based on review of v2 * TODO: This series does not handle the case where all VDD_MX votes should be higher than VDD_CX from APPs, as pointed out by David Collins in v2. This needs support at genpd to propogate performance state up the parents, if we model these as Parent/Child to handle the interdependency. Changes in v2: * added a power domain driver for sdm845 which supports communicating to RPMh * dropped the changes to sdhc driver to move over to using OPP as there is active discussion on using OPP as the interface vs handling all of it in clock drivers * Other minor binding updates based on review of v1 With performance state support for genpd/OPP merged, this is an effort to model a power domain driver to communicate corner/level values for qualcomm platforms to RPM (Remote Power Manager) and RPMh. [1] https://lkml.org/lkml/2018/11/26/333 Rajendra Nayak (10): dt-bindings: opp: Introduce qcom-opp bindings dt-bindings: power: Add qcom rpm power domain driver bindings soc: qcom: rpmpd: Add a Power domain driver to model corners soc: qcom: rpmpd: Add support for get/set performance state arm64: dts: msm8996: Add rpmpd device node soc: qcom: rpmhpd: Add RPMh power domain driver arm64: dts: sdm845: Add rpmh powercontroller node PM / Domains: Add a simple_opp_to_performance_state() helper soc: qcom: rpmpd: Use simple_opp_to_performance_state() helper soc: qcom: rpmhpd: Mark mx as a parent for cx .../devicetree/bindings/opp/qcom-opp.txt | 25 ++ .../devicetree/bindings/power/qcom,rpmpd.txt | 146 ++++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 34 ++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 51 +++ drivers/base/power/domain.c | 17 + drivers/soc/qcom/Kconfig | 18 + drivers/soc/qcom/Makefile | 2 + drivers/soc/qcom/rpmhpd.c | 419 ++++++++++++++++++ drivers/soc/qcom/rpmpd.c | 317 +++++++++++++ include/dt-bindings/power/qcom-rpmpd.h | 39 ++ include/linux/pm_domain.h | 9 + 11 files changed, 1077 insertions(+) create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt create mode 100644 drivers/soc/qcom/rpmhpd.c create mode 100644 drivers/soc/qcom/rpmpd.c create mode 100644 include/dt-bindings/power/qcom-rpmpd.h -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
