[PATCH v3 8/8] ARM: dts: qcom-apq8064: Set 'xo_board' as ref clock of the DSI PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add 'xo_board' as ref clock for the DSI PHY, it was previously
hardcoded in the PLL 'driver' for the 28nm 8960 PHY.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v3:
- patch added to the series
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 48c3cf4276101..d337ae9326cd8 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1338,8 +1338,9 @@
 				<0x04700300 0x200>,
 				<0x04700500 0x5c>;
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
-			clock-names = "iface_clk";
-			clocks = <&mmcc DSI_M_AHB_CLK>;
+			clock-names = "iface_clk", "ref";
+			clocks = <&mmcc DSI_M_AHB_CLK>,
+				 <&xo_board>;
 		};
 
 
-- 
2.20.0.rc1.387.gf8505762e3-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux