[PATCH v3 4/4] Bluetooth: hci_qca: Disable IBS state machine and flush Tx buffer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



During hci down we observed IBS sleep commands are queued in the Tx
buffer and hci_uart_write_work is sending data to the chip which is
not required as the chip is powered off. This patch will disable IBS
and flush the Tx buffer before we turn off the chip.

Signed-off-by: Balakrishna Godavarthi <bgodavar@xxxxxxxxxxxxxx>
---
v3: 
  * initial patch
---
 drivers/bluetooth/hci_qca.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d595a82cb4b9..6f2a4bf7ba17 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1286,6 +1286,8 @@ static void qca_power_shutdown(struct hci_uart *hu)
 	 * still open, discard all the garbage data received on the Rx line.
 	 */
 	set_bit(STATE_DISCARD_RX, &qca->flags);
+	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+	qca_flush(hu);
 	host_set_baudrate(hu, 2400);
 	qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
 	qca_power_setup(hu, false);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux