This series fixes the QMP PHY bindings, which had specified #clock-cells in the parent node, and had set it to 1. Putting it in the parent node is wrong because the clock providers are the child nodes, so this change moves it there. Having it set to 1 is also wrong, since nothing is ever specified as to what should go in that cell. So this changes it to zero. Finally, this change completes a little bit of code to actually allow these exposed clocks to be pointed at in DT. I had no idea how to fix up ipq8074.dtsi. It seems to be completely wrong in that it doesn't specify #clock-cells at all, has no child nodes, and specifies clock-output-names in the parent node. As far as I can tell this doesn't work at all. But I can't add the child nodes myself because I don't know 1) how many there are, and 2) the registers in them. I also have no way to test it. Speaking of testing, I was able to test this on sdm845, but haven't tested msm8996. This patch sits atop the UFS device nodes series [1]. [1] https://lore.kernel.org/lkml/20181026173544.136037-1-evgreen@xxxxxxxxxxxx/ Evan Green (4): dt-bindings: phy-qcom-qmp: Move #clock-cells to child arm64: dts: qcom: msm8996: Fix QMP PHY #clock-cells arm64: dts: qcom: sdm845: Fix QMP PHY #clock-cells phy: qcom-qmp: Expose provided clocks to DT .../devicetree/bindings/phy/qcom-qmp-phy.txt | 11 ++++----- arch/arm64/boot/dts/qcom/msm8996.dtsi | 6 +++-- arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- drivers/phy/qualcomm/phy-qcom-qmp.c | 23 ++++++++++++++++++- 4 files changed, 33 insertions(+), 11 deletions(-) -- 2.18.1
