Some following changes extends the PSCI driver with some additional new
files. Let's avoid to continue cluttering the toplevel firmware directory
and first move the PSCI files into a PSCI sub-directory.
Suggested-by: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
Changes in v10:
- None.
---
drivers/firmware/Kconfig | 15 +--------------
drivers/firmware/Makefile | 3 +--
drivers/firmware/psci/Kconfig | 13 +++++++++++++
drivers/firmware/psci/Makefile | 4 ++++
drivers/firmware/{ => psci}/psci.c | 0
drivers/firmware/{ => psci}/psci_checker.c | 0
6 files changed, 19 insertions(+), 16 deletions(-)
create mode 100644 drivers/firmware/psci/Kconfig
create mode 100644 drivers/firmware/psci/Makefile
rename drivers/firmware/{ => psci}/psci.c (100%)
rename drivers/firmware/{ => psci}/psci_checker.c (100%)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 7273e5082b41..0400afb2fec7 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -5,20 +5,6 @@
menu "Firmware Drivers"
-config ARM_PSCI_FW
- bool
-
-config ARM_PSCI_CHECKER
- bool "ARM PSCI checker"
- depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
- help
- Run the PSCI checker during startup. This checks that hotplug and
- suspend operations work correctly when using PSCI.
-
- The torture tests may interfere with the PSCI checker by turning CPUs
- on and off through hotplug, so for now torture tests and PSCI checker
- are mutually exclusive.
-
config ARM_SCMI_PROTOCOL
bool "ARM System Control and Management Interface (SCMI) Message Protocol"
depends on ARM || ARM64 || COMPILE_TEST
@@ -258,6 +244,7 @@ config TI_SCI_PROTOCOL
config HAVE_ARM_SMCCC
bool
+source "drivers/firmware/psci/Kconfig"
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 3158dffd9914..6670ebe21463 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -2,8 +2,6 @@
#
# Makefile for the linux kernel.
#
-obj-$(CONFIG_ARM_PSCI_FW) += psci.o
-obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o
obj-$(CONFIG_ARM_SDE_INTERFACE) += arm_sdei.o
@@ -24,6 +22,7 @@ CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQU
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += arm_scmi/
+obj-y += psci/
obj-y += broadcom/
obj-y += meson/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
diff --git a/drivers/firmware/psci/Kconfig b/drivers/firmware/psci/Kconfig
new file mode 100644
index 000000000000..26a3b32bf7ab
--- /dev/null
+++ b/drivers/firmware/psci/Kconfig
@@ -0,0 +1,13 @@
+config ARM_PSCI_FW
+ bool
+
+config ARM_PSCI_CHECKER
+ bool "ARM PSCI checker"
+ depends on ARM_PSCI_FW && HOTPLUG_CPU && CPU_IDLE && !TORTURE_TEST
+ help
+ Run the PSCI checker during startup. This checks that hotplug and
+ suspend operations work correctly when using PSCI.
+
+ The torture tests may interfere with the PSCI checker by turning CPUs
+ on and off through hotplug, so for now torture tests and PSCI checker
+ are mutually exclusive.
diff --git a/drivers/firmware/psci/Makefile b/drivers/firmware/psci/Makefile
new file mode 100644
index 000000000000..1956b882470f
--- /dev/null
+++ b/drivers/firmware/psci/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_PSCI_CHECKER) += psci_checker.o
diff --git a/drivers/firmware/psci.c b/drivers/firmware/psci/psci.c
similarity index 100%
rename from drivers/firmware/psci.c
rename to drivers/firmware/psci/psci.c
diff --git a/drivers/firmware/psci_checker.c b/drivers/firmware/psci/psci_checker.c
similarity index 100%
rename from drivers/firmware/psci_checker.c
rename to drivers/firmware/psci/psci_checker.c
--
2.17.1
