Re: [RFC] mmc: host: sdhci-msm: Use the interconnect API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 11 Oct 05:03 PDT 2018, Georgi Djakov wrote:

> The interconnect API provides an interface for consumer drivers to express
> their bandwidth needs in the SoC. This data is aggregated and the on-chip
> interconnect hardware is configured to the appropriate power/performance
> profile.
> 
> Use the interconnect API to get() the path between the endpoints used for
> data transfers by the SD host controller and report the needed bandwidth
> based on the clock rate, bus width and mode.
> 

Although the Qualcomm SDHCI driver is our primary target, wouldn't it be
possible to add this in the mmc core or sdhci helper functions instead,
so that other platforms doesn't need to duplicate this code?

[..]
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
[..]
> @@ -1917,6 +1957,7 @@ static int sdhci_msm_runtime_suspend(struct device *dev)
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>  	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>  
> +	icc_set(msm_host->path, 0, 0);

The use sdhci_msm_icc_update() to enable a bus vote and icc_set() to
disable the vote lacks symmetry. Please see if this can be improved,
e.g. by passing a boolean to the update function to "enable"/"disable"
the vote.

>  	clk_bulk_disable_unprepare(ARRAY_SIZE(msm_host->bulk_clks),
>  				   msm_host->bulk_clks);
>  
> @@ -1929,6 +1970,7 @@ static int sdhci_msm_runtime_resume(struct device *dev)
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>  	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>  
> +	sdhci_msm_icc_update(msm_host);
>  	return clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
>  				       msm_host->bulk_clks);
>  }

Regards,
Bjorn



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux