[PATCH v2 6/7] arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add 'bi_tcxo' as ref clock for the DSI PHYs, it was previously
hardcoded in the PLL 'driver' for the 10nm PHY.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
based on "[v4,1/3] arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file"
  (https://patchwork.kernel.org/patch/10666253/)

Changes in v2:
- patch added to the series
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5728b4cfae269..cdb5a9bb23e69 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1372,8 +1372,9 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
 			};
 
 			dsi1: dsi@ae96000 {
@@ -1434,8 +1435,9 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
 			};
 		};
 
-- 
2.20.0.rc0.387.gc7a69e6b6c-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux