Re: [PATCH v2 1/3] watchdog: Add pm8916 watchdog driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 21, 2018 at 06:27:42PM +0100, Loic Poulain wrote:
> The PM816 module is a versatile PMIC with many diverse functions
> integrated, including, a watchdog.
> This watchdog is subcomponent of the PON (Power On) peripheral,
> in the same way as pwrkey/resin buttons.
> It works with two timers (2-stages), the first one generates an
> IRQ to the main SoC (APQ8016/MSM8916), the second one performs
> the reset.
> 
> This driver expects the following device hierarchy:
> [pm8916]->[pm8916-pon]->[pm8916-wdt]
> 
> It uses the pm8916 regmap to access PM8916 registers.
> 
> Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
> ---
>  v2: SPDX license
>      headers ordering
>      coding styles / tabs / multi-line comments
>      pretimeout / bark interrupt
>      WDIOF_MAGICCLOSE flag
>      timeout init via fdt
>      devm usage
> 
>  drivers/watchdog/Kconfig      |   8 ++
>  drivers/watchdog/Makefile     |   1 +
>  drivers/watchdog/pm8916_wdt.c | 214 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 223 insertions(+)
>  create mode 100644 drivers/watchdog/pm8916_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 2d64333..ef2c2b5 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -847,6 +847,14 @@ config SPRD_WATCHDOG
>  	  Say Y here to include watchdog timer supported
>  	  by Spreadtrum system.
>  
> +config PM8916_WATCHDOG
> +	tristate "QCOM PM8916 pmic watchdog"
> +	depends on OF && MFD_SPMI_PMIC
> +	select WATCHDOG_CORE
> +	help
> +	  Say Y here to include support watchdog timer embedded into the
> +	  pm8916 module.
> +
>  # X86 (i386 + ia64 + x86_64) Architecture
>  
>  config ACQUIRE_WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index f69cdff..cc90e72 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -92,6 +92,7 @@ obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
>  obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
>  obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
>  obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
> +obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
>  
>  # X86 (i386 + ia64 + x86_64) Architecture
>  obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
> diff --git a/drivers/watchdog/pm8916_wdt.c b/drivers/watchdog/pm8916_wdt.c
> new file mode 100644
> index 0000000..25d1110
> --- /dev/null
> +++ b/drivers/watchdog/pm8916_wdt.c
> @@ -0,0 +1,214 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <linux/bitops.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/property.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/watchdog.h>
> +
> +#define PON_INT_RT_STS			0x10
> +#define PMIC_WD_BARK_STS_BIT		BIT(6)
> +
> +#define PON_PMIC_WD_RESET_S1_TIMER	0x54
> +#define PON_PMIC_WD_RESET_S2_TIMER	0x55
> +
> +#define PON_PMIC_WD_RESET_S2_CTL	0x56
> +#define RESET_TYPE_WARM			0x01
> +#define RESET_TYPE_SHUTDOWN		0x04
> +#define RESET_TYPE_HARD			0x07
> +
> +#define PON_PMIC_WD_RESET_S2_CTL2	0x57
> +#define S2_RESET_EN_BIT			BIT(7)
> +
> +#define PON_PMIC_WD_RESET_PET		0x58
> +#define WATCHDOG_PET_BIT		BIT(0)
> +
> +#define PM8916_WDT_DEFAULT_TIMEOUT	32
> +#define PM8916_WDT_MIN_TIMEOUT		1
> +#define PM8916_WDT_MAX_TIMEOUT		127
> +
> +struct pm8916_wdt {
> +	struct device *dev;

Not used anywhere.

> +	struct regmap *regmap;
> +	struct watchdog_device wdev;
> +	u32 baseaddr;
> +	int irq;

Not used anywhere except for the probe function, and there it can be
kept internal.

Guenter



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux