[PATCH v2 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Document support for the Watchdog Timer (WDT) Controller in the
Qualcomm PM8916 PMIC module.

Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
 v2: Add interrupts and timeout-sec props

 .../bindings/watchdog/qcom,pm8916-wdt.txt          | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
new file mode 100644
index 0000000..8a0d304
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt
@@ -0,0 +1,29 @@
+QCOM PM8916 watchdog timer controller
+
+This pm8916 watchdog timer controller must be under pm8916-pon node.
+
+Required properties:
+- compatible: should be "qcom,pm8916-wdt"
+
+Optional properties :
+- interrupts : interrupt for pre-timeout (bark)
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+                if unset, the default timeout is 30 seconds
+
+Example:
+
+	pm8916_0: pm8916@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			watchdog {
+				compatible = "qcom,pm8916-wdt";
+				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+				timeout-sec = <10>;
+			};
+		};
+	};
-- 
2.7.4




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux