Re: [PATCH] arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 27, 2018 at 02:22:53PM -0700, Matthias Kaehlcke wrote:
> The temperature information from the temp-alarm block itself is very
> coarse ("temperature is above/below trip points"). Provide the driver
> with the die temperature channel of the ADC on the PMIC for more precise
> readings.
> 
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> ---
> - based on agross/for-next (7a002fe0179c "Merge branch
>   'defconfig-for-4.20' into all-for-4.20-redo"))
> - depends on e13d757279bb ("iio: adc: Add QCOM SPMI PMIC5 ADC driver")
>   from IIO pull request:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-4.20a
> - to work properly https://patchwork.kernel.org/patch/10594491/ is
>   needed
> ---
>  arch/arm64/boot/dts/qcom/pm8998.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 048f19fa0150..fab5a826fb01 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -58,6 +58,8 @@
>  			compatible = "qcom,spmi-temp-alarm";
>  			reg = <0x2400>;
>  			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
> +			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
> +			io-channel-names = "thermal";
>  			#thermal-sensor-cells = <0>;
>  		};
>  

I think this should be ready to land in for-next now that "arm64: dts:
qcom: pm8998: Add die temperature channel node to the ADC"
(a789fd0bab57) has been added.

Cheers

Matthias



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux