It's based on a downstream driver from Sriharsha Allenki <sallenki@xxxxxxxxxxxxxx> that uses USB phy framework, and gets rewrote to adpot generic phy framework together with quite some cleanups. Changes for v3: - Use SoC specific compatible "qcom,qcs404-usb-hsphy". - Use OF graph instead of extcon bindings to model the link to USB connector. Changes for v2: - Add a pointer to phy/phy-bindings.txt for property #phy-cells. - Roll back voltage settings in case function qcom_snps_hsphy_config_regulators() fails in the middle. - Add a comment for init-seq tuple which consists of 3 numbers. - Sort include headers alphabetically. - Sort register definitions in order of offset. Shawn Guo (1): phy: qualcomm: Add Synopsys High-Speed USB PHY driver Sriharsha Allenki (1): dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding .../phy/qcom,snps-28nm-usb-hs-phy.txt | 108 ++++ drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c | 513 ++++++++++++++++++ 4 files changed, 632 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c -- 2.18.0
