Re: [PATCH 5/9] drm/msm: add headless gpu device (for imx5)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for  the patch. Perhaps a small blurb here for the commit log to let
folks know what your intent was.

On Wed, Nov 14, 2018 at 05:24:12PM -0500, Jonathan Marek wrote:
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
>  drivers/gpu/drm/msm/Kconfig       |  4 ++--
>  drivers/gpu/drm/msm/msm_debugfs.c |  2 +-
>  drivers/gpu/drm/msm/msm_drv.c     | 15 +++++++++++----
>  include/linux/qcom_scm.h          |  3 +++
>  4 files changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
> index 843a9d40c05e..cf549f1ed403 100644
> --- a/drivers/gpu/drm/msm/Kconfig
> +++ b/drivers/gpu/drm/msm/Kconfig
> @@ -2,7 +2,7 @@
>  config DRM_MSM
>  	tristate "MSM DRM"
>  	depends on DRM
> -	depends on ARCH_QCOM || (ARM && COMPILE_TEST)
> +	depends on ARCH_QCOM || SOC_IMX5 || (ARM && COMPILE_TEST)
>  	depends on OF && COMMON_CLK
>  	depends on MMU
>  	select QCOM_MDT_LOADER if ARCH_QCOM
> @@ -11,7 +11,7 @@ config DRM_MSM
>  	select DRM_PANEL
>  	select SHMEM
>  	select TMPFS
> -	select QCOM_SCM
> +	select QCOM_SCM if ARCH_QCOM
>  	select WANT_DEV_COREDUMP
>  	select SND_SOC_HDMI_CODEC if SND_SOC
>  	select SYNC_FILE
> diff --git a/drivers/gpu/drm/msm/msm_debugfs.c b/drivers/gpu/drm/msm/msm_debugfs.c
> index f0da0d3c8a80..1ca99ca356a4 100644
> --- a/drivers/gpu/drm/msm/msm_debugfs.c
> +++ b/drivers/gpu/drm/msm/msm_debugfs.c
> @@ -235,7 +235,7 @@ int msm_debugfs_init(struct drm_minor *minor)
>  	debugfs_create_file("gpu", S_IRUSR, minor->debugfs_root,
>  		dev, &msm_gpu_fops);
>  
> -	if (priv->kms->funcs->debugfs_init) {
> +	if (priv->kms && priv->kms->funcs->debugfs_init) {
>  		ret = priv->kms->funcs->debugfs_init(priv->kms, minor);
>  		if (ret)
>  			return ret;
> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> index 9f219e02f3c7..a10cc0298d38 100644
> --- a/drivers/gpu/drm/msm/msm_drv.c
> +++ b/drivers/gpu/drm/msm/msm_drv.c
> @@ -344,6 +344,7 @@ static int msm_drm_uninit(struct device *dev)
>  	return 0;
>  }
>  
> +#define KMS_HEADLESS 1
>  #define KMS_MDP4 4
>  #define KMS_MDP5 5
>  #define KMS_DPU  3
> @@ -495,6 +496,9 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
>  	msm_gem_shrinker_init(ddev);
>  
>  	switch (get_mdp_ver(pdev)) {
> +	case KMS_HEADLESS:
> +		priv->kms = kms = NULL;

I don't think you need to set priv->kms, it should come in as NULL. I would
normally say that you should set kms to NULL when it is declared, but I kind of
like pointing it out to the user.

> +		break;
>  	case KMS_MDP4:
>  		kms = mdp4_kms_init(ddev);
>  		priv->kms = kms;
> @@ -633,7 +637,7 @@ static int msm_drm_init(struct device *dev, struct drm_driver *drv)
>  	drm_mode_config_reset(ddev);
>  
>  #ifdef CONFIG_DRM_FBDEV_EMULATION
> -	if (fbdev)
> +	if (kms && fbdev)
>  		priv->fbdev = msm_fbdev_init(ddev);
>  #endif
>  
> @@ -1315,9 +1319,11 @@ static int msm_pdev_probe(struct platform_device *pdev)
>  	struct component_match *match = NULL;
>  	int ret;
>  
> -	ret = add_display_components(&pdev->dev, &match);
> -	if (ret)
> -		return ret;
> +	if (get_mdp_ver(pdev) != KMS_HEADLESS) {
> +		ret = add_display_components(&pdev->dev, &match);
> +		if (ret)
> +			return ret;
> +	}
>  
>  	ret = add_gpu_components(&pdev->dev, &match);
>  	if (ret)
> @@ -1342,6 +1348,7 @@ static int msm_pdev_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id dt_match[] = {
> +	{ .compatible = "qcom,adreno-headless", .data = (void *)KMS_HEADLESS },
>  	{ .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
>  	{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
>  	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index 06996ad4f2bc..1637385bcc17 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -67,6 +67,9 @@ extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
>  extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
>  extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
>  #else
> +
> +#include <linux/errno.h>
> +

This looks like a separate patch, albeit a useful one.

>  static inline
>  int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
>  {

Jordan

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux