Re: [PATCH v1 5/5] media: venus: update number of bytes used field properly for EOS frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On 11/12/18 10:12 AM, Alexandre Courbot wrote:
> Hi Stan,
> 
> On Thu, Nov 8, 2018 at 7:16 PM Stanimir Varbanov
> <stanimir.varbanov@xxxxxxxxxx> wrote:
>>
>> Hi,
>>
>> On 9/29/18 3:00 PM, Srinu Gorle wrote:
>>> - In video decoder session, update number of bytes used for
>>>   yuv buffers appropriately for EOS buffers.
>>>
>>> Signed-off-by: Srinu Gorle <sgorle@xxxxxxxxxxxxxx>
>>> ---
>>>  drivers/media/platform/qcom/venus/vdec.c | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> NACK, that was already discussed see:
>>
>> https://patchwork.kernel.org/patch/10630411/
> 
> I believe you are referring to this discussion?
> 
> https://lkml.org/lkml/2018/10/2/302
> 
> In this case, with https://patchwork.kernel.org/patch/10630411/
> applied, I am seeing the troublesome case of having the last (empty)
> buffer being returned with a payload of obs_sz, which I believe is
> incorrect. The present patch seems to restore the correct behavior.

Sorry, I thought that this solution was suggested (and tested on Venus
v4) by you, right?

> 
> An alternative would be to set the payload as follows:
> 
> vb2_set_plane_payload(vb, 0, bytesused);
> 
> This works for SDM845, but IIRC we weren't sure that this would
> display the correct behavior with all firmware versions?

OK if you are still seeing issues I think we can switch to
vb2_set_plane_payload(vb, 0, bytesused); for all buffers? I.e. not only
for buffers with flag V4L2_BUF_FLAG_LAST set.

> 
>>
>>>
>>> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
>>> index 311f209..a48eed1 100644
>>> --- a/drivers/media/platform/qcom/venus/vdec.c
>>> +++ b/drivers/media/platform/qcom/venus/vdec.c
>>> @@ -978,7 +978,7 @@ static void vdec_buf_done(struct venus_inst *inst, unsigned int buf_type,
>>>
>>>               if (vbuf->flags & V4L2_BUF_FLAG_LAST) {
>>>                       const struct v4l2_event ev = { .type = V4L2_EVENT_EOS };
>>> -
>>> +                     vb->planes[0].bytesused = bytesused;

Is 'bytesused' != 0 in case of EoS ever?

i.e. shouldn't this be vb->planes[0].bytesused = 0 ?

>>>                       v4l2_event_queue_fh(&inst->fh, &ev);
>>>               }
>>>       } else {
>>>
>>
>> --
>> regards,
>> Stan

-- 
regards,
Stan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux