Re: [PATCH v2 13/17] arm64: dts: qcom: qcs404: Add remoteproc nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon 05 Nov 07:45 PST 2018, Vinod Koul wrote:

> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> Add the TrustZone based remoteproc nodes and their glink edges for
> adsp, cdsp and wcss.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/qcs404.dtsi | 87 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 87 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 8e207a25ddf0..b560ab6e49ff 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -373,4 +373,91 @@
>  			#interrupt-cells = <2>;
>  		};
>  	};
> +
> +	remoteproc-adsp {
> +		compatible = "qcom,qcs404-adsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +

As the TZ-backed remoteproc drivers will not be used on all variation of
products on this platform please add status = "disabled"; to these nodes
and enable them in the evb.

Regards,
Bjorn

> +		memory-region = <&adsp_fw_mem>;
> +
> +		qcom,smem-states = <&adsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <2>;
> +			mboxes = <&apcs_glb 8>;
> +
> +			label = "adsp";
> +		};
> +	};
> +
> +	remoteproc-cdsp {
> +		compatible = "qcom,qcs404-cdsp-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +
> +		memory-region = <&cdsp_fw_mem>;
> +
> +		qcom,smem-states = <&cdsp_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <5>;
> +			mboxes = <&apcs_glb 12>;
> +
> +			label = "cdsp";
> +		};
> +	};
> +
> +	remoteproc-wcss {
> +		compatible = "qcom,qcs404-wcss-pas";
> +
> +		interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +				      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +		interrupt-names = "wdog", "fatal", "ready",
> +				  "handover", "stop-ack";
> +
> +		clocks = <&xo_board>;
> +		clock-names = "xo";
> +
> +		memory-region = <&wlan_fw_mem>;
> +
> +		qcom,smem-states = <&wcss_smp2p_out 0>;
> +		qcom,smem-state-names = "stop";
> +
> +		glink-edge {
> +			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
> +
> +			qcom,remote-pid = <1>;
> +			mboxes = <&apcs_glb 16>;
> +
> +			label = "wcss";
> +		};
> +	};
>  };
> -- 
> 2.14.4
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux