On 2018-11-01 12:09, Sean Paul wrote:
On Wed, Oct 31, 2018 at 05:19:04PM -0700, Jeykumar Sankaran wrote:
DPU was using one thread per display to dispatch async
commits and vblank requests. Since clean up already happened
in msm to use the common thread for all the display commits,
display threads are only used to cater vblank requests. Single
thread is sufficient to do the job without any performance hits.
Signed-off-by: Jeykumar Sankaran <jsanka@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 6 +---
drivers/gpu/drm/msm/msm_drv.c | 50
++++++++++++-----------------
drivers/gpu/drm/msm/msm_drv.h | 2 +-
3 files changed, 23 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 82c55ef..aff20f5 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -753,11 +753,7 @@ static int dpu_encoder_resource_control(struct
drm_encoder *drm_enc,
is_vid_mode = dpu_enc->disp_info.capabilities &
MSM_DISPLAY_CAP_VID_MODE;
- if (drm_enc->crtc->index >= ARRAY_SIZE(priv->disp_thread)) {
- DPU_ERROR("invalid crtc index\n");
- return -EINVAL;
- }
- disp_thread = &priv->disp_thread[drm_enc->crtc->index];
+ disp_thread = &priv->disp_thread;
/*
* when idle_pc is not supported, process only KICKOFF, STOP and
MODESET
diff --git a/drivers/gpu/drm/msm/msm_drv.c
b/drivers/gpu/drm/msm/msm_drv.c
index 9c9f7ff..1f384b3 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -257,8 +257,7 @@ static int vblank_ctrl_queue_work(struct
msm_drm_private *priv,
list_add_tail(&vbl_ev->node, &vbl_ctrl->event_list);
spin_unlock_irqrestore(&vbl_ctrl->lock, flags);
- kthread_queue_work(&priv->disp_thread[crtc_id].worker,
- &vbl_ctrl->work);
+ kthread_queue_work(&priv->disp_thread.worker, &vbl_ctrl->work);
return 0;
}
@@ -284,14 +283,12 @@ static int msm_drm_uninit(struct device *dev)
kfree(vbl_ev);
}
+ kthread_flush_worker(&priv->disp_thread.worker);
+ kthread_stop(priv->disp_thread.thread);
I realize this is moving existing code, but is there a race here? You
can't have
work enqueued in between the flush and stop?
Yes. I see only priv->kms is checked before queuing the work.
I can move the thread cleanup after the drm_mode_config_cleanup which
releases the CRTC objects. This way no one can make any further vblank
requests.
Thanks and Regards,
Jeykumar S.
You might also want to use kthread_destroy_worker to do this work (in a
follow-up patch including the event threads too).
+ priv->disp_thread.thread = NULL;
+
/* clean up display commit/event worker threads */
This comment needs updating now
for (i = 0; i < priv->num_crtcs; i++) {
- if (priv->disp_thread[i].thread) {
-
kthread_flush_worker(&priv->disp_thread[i].worker);
- kthread_stop(priv->disp_thread[i].thread);
- priv->disp_thread[i].thread = NULL;
- }
-
if (priv->event_thread[i].thread) {
kthread_flush_worker(&priv->event_thread[i].worker);
kthread_stop(priv->event_thread[i].thread);
@@ -537,6 +534,22 @@ static int msm_drm_init(struct device *dev,
struct
drm_driver *drv)
ddev->mode_config.funcs = &mode_config_funcs;
ddev->mode_config.helper_private = &mode_config_helper_funcs;
+ /* initialize display thread */
+ kthread_init_worker(&priv->disp_thread.worker);
+ priv->disp_thread.dev = ddev;
+ priv->disp_thread.thread = kthread_run(kthread_worker_fn,
+ &priv->disp_thread.worker,
+ "disp_thread");
+ if (IS_ERR(priv->disp_thread.thread)) {
+ DRM_DEV_ERROR(dev, "failed to create crtc_commit
kthread\n");
+ priv->disp_thread.thread = NULL;
+ goto err_msm_uninit;
+ }
+
+ ret = sched_setscheduler(priv->disp_thread.thread, SCHED_FIFO,
¶m);
+ if (ret)
+ pr_warn("display thread priority update failed: %d\n",
ret);
+
/**
* this priority was found during empiric testing to have
appropriate
* realtime scheduling to process display updates and interact
with
@@ -544,27 +557,6 @@ static int msm_drm_init(struct device *dev,
struct
drm_driver *drv)
*/
param.sched_priority = 16;
for (i = 0; i < priv->num_crtcs; i++) {
-
- /* initialize display thread */
- priv->disp_thread[i].crtc_id = priv->crtcs[i]->base.id;
- kthread_init_worker(&priv->disp_thread[i].worker);
- priv->disp_thread[i].dev = ddev;
- priv->disp_thread[i].thread =
- kthread_run(kthread_worker_fn,
- &priv->disp_thread[i].worker,
- "crtc_commit:%d",
priv->disp_thread[i].crtc_id);
- if (IS_ERR(priv->disp_thread[i].thread)) {
- DRM_DEV_ERROR(dev, "failed to create crtc_commit
kthread\n");
- priv->disp_thread[i].thread = NULL;
- goto err_msm_uninit;
- }
-
- ret = sched_setscheduler(priv->disp_thread[i].thread,
- SCHED_FIFO, ¶m);
- if (ret)
- dev_warn(dev, "disp_thread set priority failed:
%d\n",
- ret);
-
/* initialize event thread */
priv->event_thread[i].crtc_id = priv->crtcs[i]->base.id;
kthread_init_worker(&priv->event_thread[i].worker);
diff --git a/drivers/gpu/drm/msm/msm_drv.h
b/drivers/gpu/drm/msm/msm_drv.h
index 9d11f32..e81b1fa 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -197,7 +197,7 @@ struct msm_drm_private {
unsigned int num_crtcs;
struct drm_crtc *crtcs[MAX_CRTCS];
- struct msm_drm_thread disp_thread[MAX_CRTCS];
+ struct msm_drm_thread disp_thread;
struct msm_drm_thread event_thread[MAX_CRTCS];
unsigned int num_encoders;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,
a Linux Foundation Collaborative Project
_______________________________________________
Freedreno mailing list
Freedreno@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/freedreno
--
Jeykumar S