From: Jonathan Marek <jonathan@xxxxxxxx>
This patch adds support for the bq24192 variant to bq24190_charger.
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
[masneyb@xxxxxxxxxxxxx: Changed if statement to a switch based on
feedback from Sebastian Reichel.]
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
---
drivers/power/supply/bq24190_charger.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index b58df04d03b3..44d3aff32885 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1637,8 +1637,12 @@ static int bq24190_hw_init(struct bq24190_dev_info *bdi)
if (ret < 0)
return ret;
- if (v != BQ24190_REG_VPRS_PN_24190 &&
- v != BQ24190_REG_VPRS_PN_24192I) {
+ switch (v) {
+ case BQ24190_REG_VPRS_PN_24190:
+ case BQ24190_REG_VPRS_PN_24192:
+ case BQ24190_REG_VPRS_PN_24192I:
+ break;
+ default:
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
return -ENODEV;
}
@@ -1931,6 +1935,7 @@ static const struct dev_pm_ops bq24190_pm_ops = {
static const struct i2c_device_id bq24190_i2c_ids[] = {
{ "bq24190" },
+ { "bq24192" },
{ "bq24192i" },
{ },
};
@@ -1939,6 +1944,7 @@ MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
#ifdef CONFIG_OF
static const struct of_device_id bq24190_of_match[] = {
{ .compatible = "ti,bq24190", },
+ { .compatible = "ti,bq24192", },
{ .compatible = "ti,bq24192i", },
{ },
};
--
2.17.2
