Re: [PATCH] arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/29/2018 11:45 PM, Bjorn Andersson wrote:
GPIOs 0 through 3 and 81 through 84 are configured to not be accessible
from the application CPUs. Mark them as reserved to allow the MSM8998
MTP to boot after the introduction of 3edfb7bd76bd ("gpiolib: Show
correct direction from the beginning").

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 4 ++++
  1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index b4276da1fb0d..11fd1fe8bdb5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -241,3 +241,7 @@
  		};
  	};
  };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};


Does Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt need to be updated? Seems like the majority of the other qcom pinctrl bindings docs mention that gpio-reserved-ranges is optional.

In any case,
Reviewed-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>

--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux