Moving this to resume helps with both GPU DCVS and the performance sampling. For GPU DCVS this makes sure that the frequency does not scale when there are no GPU submissions. In the case of performance profiling, the GPU is UP, but its possible that the hw_init() was not called yet, so we need this to get sane perf values in all cases. Signed-off-by: Sharat Masetty <smasetty@xxxxxxxxxxxxxx> --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index c0cd3ac..2c52b7c 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -387,14 +387,6 @@ static int a6xx_hw_init(struct msm_gpu *gpu) /* Select CP0 to always count cycles */ gpu_write(gpu, REG_A6XX_CP_PERFCTR_CP_SEL_0, PERF_CP_ALWAYS_COUNT); - /* FIXME: not sure if this should live here or in a6xx_gmu.c */ - gmu_write(&a6xx_gpu->gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK, - 0xff000000); - gmu_rmw(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0, - 0xff, 0x20); - gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE, - 0x01); - gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL, 2 << 1); gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, 2 << 1); gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, 2 << 1); @@ -655,6 +647,14 @@ static int a6xx_pm_resume(struct msm_gpu *gpu) gpu->needs_hw_init = true; + /* FIXME: not sure if this should live here or in a6xx_gmu.c */ + gmu_write(&a6xx_gpu->gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK, + 0xff000000); + gmu_rmw(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0, + 0xff, 0x20); + gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE, + 0x01); + msm_gpu_resume_devfreq(gpu); return ret; -- 1.9.1