Re: [PATCH v6] clk: qcom: Add lpass clock controller driver for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2018-10-09 23:12:27)
> 
> 
> On 10/10/2018 2:22 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2018-10-09 10:26:38)
> >> Hello Stephen,
> >>
> >> On 10/8/2018 8:14 AM, Stephen Boyd wrote:
> >>> Quoting Taniya Das (2018-10-04 05:02:26)
> >>>> Add support for the lpass clock controller found on SDM845 based devices.
> >>>> This would allow lpass peripheral loader drivers to control the clocks to
> >>>> bring the subsystem out of reset.
> >>>> LPASS clocks present on the global clock controller would be registered
> >>>> with the clock framework based on the device tree flag. Also do not gate
> >>>> these clocks if they are left unused.
> >>>
> >>> Why not gate them? This statement states what the code is doing, not why
> >>> it's doing it which is the more crucial information that should be
> >>> described in the commit text. Also, please add a comment about it to the
> >>> code next to the flag.
> >>>
> >>> I am concerned that it doesn't make any sense though, so probably it
> >>> shouldn't be marked as CLK_IGNORE_UNUSED and it's papering over some
> >>> other larger bug that needs to be fixed.
> >>>
> >>
> >> It does not have any bug, it is just that to access these lpass
> >> registers we would need the GCC lpass registers to be enabled. I would
> >> update the same in the commit text.
> >>
> >> During clock late_init these clocks should not be accessed to check the
> >> clock status as they would result in unclocked access. The client would
> >> request these clocks in the correct order and it would not have any issue.
> >>
> > 
> > That seems like the bug right there. If the LPASS registers can't be
> > accessed unless the clks in GCC are enabled then this driver needs to
> > turn the clks on before reading/writing registers. Marking the clks as
> > ignore unused is skipping around the real problem.
> > 
> 
> If the driver requests for the clocks they would maintain the order. But 
> if the clock late init call is invoked before the driver requests, there 
> is no way I could manage this dependency, that is the only reason to 
> mark them unused.
> 

Which driver are we talking about here? The lpass clk driver? Presumably
the lpass clk driver would request the GCC clks and turn them on in
probe and then register any lpass clks. If the lpass clk driver probes
bfeore late init, then the gcc clks will be enabled and everything
works, and if the lpass clk driver probes after late init then the clks
that can't be touched without gcc clks enabled won't be registered, and
then they won't be touched. What goes wrong?






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux