Re: [PATCH RFC v1 2/8] kernel/cpu_pm: Manage runtime PM in the idle path for CPUs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 12 2018 at 01:43 -0600, Rafael J. Wysocki wrote:
On Fri, Oct 12, 2018 at 12:08 AM Lina Iyer <ilina@xxxxxxxxxxxxxx> wrote:
On Thu, Oct 11 2018 at 14:56 -0600, Rafael J. Wysocki wrote:
>On Wednesday, October 10, 2018 11:20:49 PM CEST Raju P.L.S.S.S.N wrote:
>> From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

The cluster states should account for that additional latency.

But even then, you need to be sure that the idle governor selected
"cluster" states for all of the CPUs in the cluster.  It might select
WFI for one of them for reasons unrelated to the distance to the next
timer (so to speak), for example.

Well, if cpuidle chooses WFI, cpu_pm_enter() will not be called. So for
that case we are okay with this approach.

Just the CPU's power down states need not care about that.

The meaning of this sentence isn't particularly clear to me. :-)

What I meant to say is that if cpuidle chooses a CPU only power down
state, then, atleast in ARM architecture, we would not choose to power
down the cluster in the firmware. To power down the cluster in the
firmware, all CPUs need to choose a cluster state, which would account
the additional latency of powering off and on the domain.

How I ever thought that I could convey this point in that line is beyond
me now. Sorry!

But, it would be nice if the PM domain governor could be cognizant of
the idle state chosen for each CPU, that way we dont configure the
domain to be powered off when the CPUs have just chosen to power down
(not chosen a cluster state). I think that is a whole different topic to
discuss.

This needs to be sorted out before the approach becomes viable, though.

We embarked on that discussion a few years ago, but realized that there
is a lot more complexity involved in specifying that especially with DT.
I believe ACPI has a way to specify this. But DT and driver code
currently don't have a nice way to propagate this requirement to the
domain governor. So we shelved it for the future.

Basically, the domain governor needs to track what the idle governor
did for all of the CPUs in the domain and only let the domain go off
if the latency matches all of the states selected by the idle
governor.  Otherwise the idle governor's assumptions would be violated
and it would become essentially useless overhead.

Well, we kinda do that in the CPU PM domain governor. By looking at the
next wakeup and the latency/QoS requirement of each CPU in the domain,
we determine if the domain can be powered off. But, if we were to do
this by correlating domain idle states to that of the required CPU idle
state, then a lot needs to plumbed in to the cpuidle and driver model.
The current approach is rather simple while meeting most of the
requirement.

Thanks,
Lina



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux