Re: [PATCH V3 0/4] Changes for SDCC5 version

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi


On 10/8/2018 12:26 PM, Bjorn Andersson wrote:
On Sun 07 Oct 01:07 PDT 2018, Craig wrote:

Any updates on this?

FWIW I used qcom,sdhci-msm-v5 on QCS404 successfully.

Regards,
Bjorn

The base address and interrupt numbers needs to be updated in your dt.
you can refer the below link to update interrupt number and base address
https://android.googlesource.com/kernel/msm/+/android-msm-wahoo-4.4-oreo-m2/arch/arm/boot/dts/qcom/sdm660.dtsi

On 25 September 2018 16:39:33 BST, Craig <ctatlor97@xxxxxxxxx> wrote:

On 25 September 2018 12:17:26 BST, Veerabhadrarao Badiganti
<vbadigan@xxxxxxxxxxxxxx> wrote:
On 9/25/2018 1:18 AM, Craig Tatlor wrote:
What socs have you tested this on?
On sdm660 it seems to crash device
when writing pwr ctl.
Hi
We have tested this on SDM845.
SDM660 also has SDCC5 controller, so you would need to define
"qcom,sdhci-msm-v5" in your platform dt.
Can you confirm if you have defined this?

Hi,
Yes my DT entry is as follows

sdhc_1: sdhci@f9824900 {
Update this address. This could be the reason for the crash that you are observing.

compatible = "qcom,sdhci-msm-v5"; reg = <0xc0c4000 0x1000>, <0xc0c5000 0x1000>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;

Please update this interrupt map aswell.

interrupt-names = "pwr_irq";
bus-width = <8>; non-removable; vmmc-supply = <&pm660l_l4>; vqmmc-supply = <&pm660_l8>; pinctrl-names = "default"; pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data &sdc1_rclk>; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; };

BTW, can you please share few details of the platform that you are
checking?
We are not aware of any dev platform based on SDM660. This is just for
my info
I'm checking on the sony xperia xa2 (pioneer) smartphone.
On Tue, Jun 19, 2018 at 11:09:17AM +0530, Vijay Viswanath wrote:
With SDCC5, the MCI register space got removed and the offset/order
of
several registers have changed. Based on SDCC version used and the
register,
we need to pick the base address and offset.

Depends on patch series: "[PATCH V5 0/2] mmc: sdhci-msm:
Configuring
IO_PAD support for sdhci-msm"
Changes since RFC:
	Dropped voltage regulator changes in sdhci-msm
	Split the "Register changes for sdcc V5" patch
	Instead of checking mci removal for deciding which base addr to
use,
	new function pointers are defined for the 2 variants of sdcc:
		1) MCI present
		2) V5 (mci removed)
	Instead of string comparing with the compatible string from DT
file,
	the sdhci_msm_probe will now pick the data associated with the
	compatible entry and use it to load variant specific address
offsets
	and msm variant specific read/write ops.

Changes since V1:
	Removed unused msm_reab & msm_writeb APIs
	Changed certain register addresses from uppercase to lowercase hex
	letters
	Removed extra lines and spaces
	Split "[PATCH V1 0/3] Changes for SDCC5 version" patch into two,
	one for Documentation and other for the driver changes.

Changes since V2:
	Used lower case for macro function defenitions
	Removed unused function pointers for msm_readb & msm_writeb


Sayali Lokhande (3):
    mmc: sdhci-msm: Define new Register address map
    Documentation: sdhci-msm: Add new compatible string for SDCC v5
    mmc: host: Register changes for sdcc V5

Vijay Viswanath (1):
    mmc: sdhci-msm: Add msm version specific ops and data structures

   .../devicetree/bindings/mmc/sdhci-msm.txt          |   7 +-
   drivers/mmc/host/sdhci-msm.c                       | 511
++++++++++++++++-----
   2 files changed, 391 insertions(+), 127 deletions(-)

--
   Qualcomm India Private Limited, on behalf of Qualcomm Innovation
Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a
Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe
linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thanks,
Veera
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Thanks,
Veera



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux