[PATCH v2] arm64: dts: qcom: sdm845: Add qspi (quad SPI) node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds the Quad SPI controller to the main sdm845 device tree file.
Boards will be expected to assign the proper pinctrl depending on how
many chip selects they have hooked up and how many data lines.

This depends on commit 48735597f7bd ("clk: qcom: Add qspi (Quad SPI)
clock defines for sdm845 to header") to add the needed defines.  It
also shouldn't land until the patch ("dt-bindings: spi: Qualcomm Quad
SPI(QSPI) documentation") [1] lands.

[1] https://lkml.kernel.org/r/20181002214709.162330-1-ryandcase@xxxxxxxxxxxx

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

Changes in v2:
- Node is named "spi" not "qspi"

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 47 ++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0a31a5..97946f46f7f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -822,6 +822,41 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			qspi_clk: qspi-clk {
+				pinmux {
+					pins = "gpio95";
+					function = "qspi_clk";
+				};
+			};
+
+			qspi_cs0: qspi-cs0 {
+				pinmux {
+					pins = "gpio90";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_cs1: qspi-cs1 {
+				pinmux {
+					pins = "gpio89";
+					function = "qspi_cs";
+				};
+			};
+
+			qspi_data01: qspi-data01 {
+				pinmux-data {
+					pins = "gpio91", "gpio92";
+					function = "qspi_data";
+				};
+			};
+
+			qspi_data12: qspi-data12 {
+				pinmux-data {
+					pins = "gpio93", "gpio94";
+					function = "qspi_data";
+				};
+			};
+
 			qup_i2c0_default: qup-i2c0-default {
 				pinmux {
 					pins = "gpio0", "gpio1";
@@ -1070,6 +1105,18 @@
 			};
 		};
 
+		qspi: spi@88df000 {
+			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
+			reg = <0x88df000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+				 <&gcc GCC_QSPI_CORE_CLK>;
+			clock-names = "iface", "core";
+			status = "disabled";
+		};
+
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm845-qusb2-phy";
 			reg = <0x88e2000 0x400>;
-- 
2.19.0.605.g01d371f741-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux