[PATCH 0/3] Use interconnect API in MDSS on SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The interconnect API provides an interface for consumer drivers to express
their bandwidth needs in the SoC. This data is aggregated and the on-chip
interconnect hardware is configured to the appropriate power/performance
profile.

MDSS is one of the interconnect consumers which uses the interconnect APIs
to get the path between endpoints and set its bandwidth requirements
for the given interconnected path.

Subsequently, there is a clean up patch to remove all the references
of the DPU custom bus scaling.

There is corresponding DT patch with the source and destination ports
defined for display driver which will be sent separately.

Sravanthi Kollukuduru (3):
  drm/msm/dpu: clean up references of DPU custom bus scaling
  drm/msm/dpu: Integrate interconnect API in MDSS
  dt-bindings: msm/disp: Introduce interconnect bindings for MDSS on
    SDM845

 .../devicetree/bindings/display/msm/dpu.txt        |   8 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c      | 157 +++++++++------------
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h      |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |   1 -
 drivers/gpu/drm/msm/disp/dpu1/dpu_mdss.c           |  56 +++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.c   |  47 ++----
 drivers/gpu/drm/msm/disp/dpu1/dpu_power_handle.h   |  68 ---------
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h          |  21 +--
 8 files changed, 143 insertions(+), 219 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux