Tune1 register on sdm845 is used to update HSTX_TRIM with fused
setting. Enable same by specifying update_tune1_with_efuse flag
for sdm845, otherwise driver ends up programming tune2 register.
While at it, also fix HSTX_TRIM tuning logic which instead of
using fused value as HSTX_TRIM, incorrectly performs bitwise OR
operation with existing default value.
Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qusb2.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index e70e425f26f5..defeb0b7cfa0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = {
.mask_core_ready = CORE_READY_STATUS,
.has_pll_override = true,
.autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
};
static const char * const qusb2_phy_vreg_names[] = {
@@ -415,12 +416,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
/* Fused TUNE1/2 value is the higher nibble only */
if (cfg->update_tune1_with_efuse)
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
- val[0] << 0x4);
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
else
- qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
- val[0] << 0x4);
-
+ qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2],
+ val[0] << HSTX_TRIM_SHIFT,
+ HSTX_TRIM_MASK);
}
static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
