Hi Todor, Hi Vinod On Fri, Sep 21, 2018 at 5:43 PM Todor Tomov <todor.tomov@xxxxxxxxxx> wrote: > > Hi Vinod, > > On 21.09.2018 08:36, Vinod wrote: > > Hi Ricardo, > > > > On 20-09-18, 21:39, Ricardo Ribalda Delgado wrote: > >> Sorry to enter the discussion this late. > >> > >> I have been using this driver with release/qcomlt-4.14 on a db820c and > >> if I try to use the i2c bus before camss is running I get a Timeout > >> error and the bus is unusable after that. I have sent a patch that > >> fixes this issue, in case you want to merge it/add it before this > >> driver goes upstream. > > > > Thanks for this, I will test and port the fix to upstream and send it > > along. > > > >> Is there a way to use the i2c bus without using the camera? > > > > This is Camera specific bus but it is an i2c bus, so theoretically it > > should be possible to do so, Todor do you know if that is doable/done? > > I'm not aware of such experiments but yes, if you manage to connect > another i2c hardware it should be possible to control it. I can access other i2c devices, but only when I am streaming images. > > -- > Best regards, > Todor Tomov -- Ricardo Ribalda
