Add PON and pwrkey as child nodes for PON driver.
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8994.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 80024c0b1c7c..76b5a3e6a2b5 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
@@ -17,6 +18,23 @@
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
--
2.14.4
