[PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a channel node for the die temperature to the ADC.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
--
Changes in v2:
- none
---
 arch/arm64/boot/dts/qcom/pm8998.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 41593ebbea2c..d18d4f260fbe 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -19,6 +19,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
+
+			die-temp {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
 		};
 
 		pm8998_gpio: gpios@c000 {
-- 
2.19.0.rc2.392.g5ba43deb5a-goog




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux