Re: [PATCH v3 2/2] clk: qcom: Add lpass clock controller driver for SDM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Taniya Das (2018-09-05 11:26:10)
> On 8/28/2018 2:41 AM, Stephen Boyd wrote:
> > Quoting Taniya Das (2018-08-03 05:21:14)
> >> diff --git a/drivers/clk/qcom/lpasscc-sdm845.c b/drivers/clk/qcom/lpasscc-sdm845.c
> >> new file mode 100644
> >> index 0000000..6f387f9
> >> --- /dev/null
> >> +++ b/drivers/clk/qcom/lpasscc-sdm845.c
> > [...]
> >> +
> >> +/* CLK_OFF would not toggle until LPASS is not out of reset */
> > 
> > Can we change the branch ops to check for out of reset or not? Do the
> > clks even work when LPASS isn't out of reset? Why would the clk APIs
> > even be called on here if it hadn't taken LPASS out of reset?
> > 
> 
> The branches need to be turned ON before the LPASS is out of reset.
> But we would not be able to check the CLK_ENABLE bit.

Ok. Are the branches actually outputting any clk frequency when LPASS is
in reset? It sounds like the hardware is broken and we can't ever check
the halt bits?





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux