Re: [PATCH v3] rpmsg: qcom_smd: Access APCS through mailbox framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/30/18 21:07, Bjorn Andersson wrote:
> On Thu 30 Aug 20:57 PDT 2018, Frank Rowand wrote:
> 
>> Hi Bjorn,
>>
>>
>> On 04/19/18 18:17, Bjorn Andersson wrote:
>>> Attempt to acquire the APCS IPC through the mailbox framework and fall
>>> back to the old syscon based approach, to allow us to move away from
>>> using the syscon.
>>>
>>> Reviewed-by: Arun Kumar Neelakantam <aneela@xxxxxxxxxxxxxx>
>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>>> ---
>>>
>>> Changes since v2:
>>> - Added comment about mbox_send_message() return value.
>>>
>>>  .../devicetree/bindings/soc/qcom/qcom,smd.txt      |  8 ++-
>>>  drivers/rpmsg/Kconfig                              |  1 +
>>>  drivers/rpmsg/qcom_smd.c                           | 67 ++++++++++++++++------
>>>  3 files changed, 56 insertions(+), 20 deletions(-)
>>
>> This patch in the mainline Linux kernel as commit ab460a2e72dabecfdabd45eb7e3ee2d73fc876d4
>> causes a problem with the APQ8074 Dragonboard.  The mmc device is not set up
>> with the patch applied, thus I do not have the block device my root file system
>> is located on.
>>
>> Testing on v4.18, if I revert this commit the mmc device is available.
>>
>> I'll reply to this email with the console messages for 4.18 and for 4.18 with
>> this commit reverted.
>>
> 
> The mmc device would fail to come up if the regulators didn't come up,
> which would be the result of smd not working. But it should fallback to
> the old mechanism if no mailbox is specified.
> 
> Can you double check that CONFIG_RPMSG_QCOM_SMD is still set in your
> .config after applying and building with this commit included? And if
> not, try to enable CONFIG_MAILBOX.

Thank you!

That is indeed the cause.  ab460a2e72da added a "depends on MAILBOX" to
CONFIG_RPMSG_QCOM_SMD, so CONFIG_RPMSG_QCOM_SMD becomes unset since
CONFIG_MAILBOX is not enabled in qcom_defconfig and is not otherwise
selected for the dragonboard.

Is there a config variable that should be selecting MAILBOX for a class
of systems that would include the APQ8074 Dragonboard?  For my testing
I added the "select MAILBOX" to CONFIG_ARCH_MSM8974, but I do not know
what systems that includes, and whether it is appropriate to do the
select for all of them.

-Frank

> 
> Regards,
> Bjorn
> 
>> -Frank
>>
>>
>>>
>>> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
>>> index ea1dc75ec9ea..234ae2256501 100644
>>> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
>>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt
>>> @@ -22,9 +22,15 @@ The edge is described by the following properties:
>>>  	Definition: should specify the IRQ used by the remote processor to
>>>  		    signal this processor about communication related updates
>>>  
>>> -- qcom,ipc:
>>> +- mboxes:
>>>  	Usage: required
>>>  	Value type: <prop-encoded-array>
>>> +	Definition: reference to the associated doorbell in APCS, as described
>>> +		    in mailbox/mailbox.txt
>>> +
>>> +- qcom,ipc:
>>> +	Usage: required, unless mboxes is specified
>>> +	Value type: <prop-encoded-array>
>>>  	Definition: three entries specifying the outgoing ipc bit used for
>>>  		    signaling the remote processor:
>>>  		    - phandle to a syscon node representing the apcs registers
>>> diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig
>>> index 0fe6eac46512..2e4fb4ffd562 100644
>>> --- a/drivers/rpmsg/Kconfig
>>> +++ b/drivers/rpmsg/Kconfig
>>> @@ -39,6 +39,7 @@ config RPMSG_QCOM_GLINK_SMEM
>>>  
>>>  config RPMSG_QCOM_SMD
>>>  	tristate "Qualcomm Shared Memory Driver (SMD)"
>>> +	depends on MAILBOX
>>>  	depends on QCOM_SMEM
>>>  	select RPMSG
>>>  	help
>>> diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
>>> index bc0b30657230..3ff271a44bef 100644
>>> --- a/drivers/rpmsg/qcom_smd.c
>>> +++ b/drivers/rpmsg/qcom_smd.c
>>> @@ -14,6 +14,7 @@
>>>  
>>>  #include <linux/interrupt.h>
>>>  #include <linux/io.h>
>>> +#include <linux/mailbox_client.h>
>>>  #include <linux/mfd/syscon.h>
>>>  #include <linux/module.h>
>>>  #include <linux/of_irq.h>
>>> @@ -107,6 +108,8 @@ static const struct {
>>>   * @ipc_regmap:		regmap handle holding the outgoing ipc register
>>>   * @ipc_offset:		offset within @ipc_regmap of the register for ipc
>>>   * @ipc_bit:		bit in the register at @ipc_offset of @ipc_regmap
>>> + * @mbox_client:	mailbox client handle
>>> + * @mbox_chan:		apcs ipc mailbox channel handle
>>>   * @channels:		list of all channels detected on this edge
>>>   * @channels_lock:	guard for modifications of @channels
>>>   * @allocated:		array of bitmaps representing already allocated channels
>>> @@ -129,6 +132,9 @@ struct qcom_smd_edge {
>>>  	int ipc_offset;
>>>  	int ipc_bit;
>>>  
>>> +	struct mbox_client mbox_client;
>>> +	struct mbox_chan *mbox_chan;
>>> +
>>>  	struct list_head channels;
>>>  	spinlock_t channels_lock;
>>>  
>>> @@ -366,7 +372,17 @@ static void qcom_smd_signal_channel(struct qcom_smd_channel *channel)
>>>  {
>>>  	struct qcom_smd_edge *edge = channel->edge;
>>>  
>>> -	regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
>>> +	if (edge->mbox_chan) {
>>> +		/*
>>> +		 * We can ignore a failing mbox_send_message() as the only
>>> +		 * possible cause is that the FIFO in the framework is full of
>>> +		 * other writes to the same bit.
>>> +		 */
>>> +		mbox_send_message(edge->mbox_chan, NULL);
>>> +		mbox_client_txdone(edge->mbox_chan, 0);
>>> +	} else {
>>> +		regmap_write(edge->ipc_regmap, edge->ipc_offset, BIT(edge->ipc_bit));
>>> +	}
>>>  }
>>>  
>>>  /*
>>> @@ -1326,27 +1342,37 @@ static int qcom_smd_parse_edge(struct device *dev,
>>>  	key = "qcom,remote-pid";
>>>  	of_property_read_u32(node, key, &edge->remote_pid);
>>>  
>>> -	syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
>>> -	if (!syscon_np) {
>>> -		dev_err(dev, "no qcom,ipc node\n");
>>> -		return -ENODEV;
>>> -	}
>>> +	edge->mbox_client.dev = dev;
>>> +	edge->mbox_client.knows_txdone = true;
>>> +	edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0);
>>> +	if (IS_ERR(edge->mbox_chan)) {
>>> +		if (PTR_ERR(edge->mbox_chan) != -ENODEV)
>>> +			return PTR_ERR(edge->mbox_chan);
>>>  
>>> -	edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
>>> -	if (IS_ERR(edge->ipc_regmap))
>>> -		return PTR_ERR(edge->ipc_regmap);
>>> +		edge->mbox_chan = NULL;
>>>  
>>> -	key = "qcom,ipc";
>>> -	ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
>>> -	if (ret < 0) {
>>> -		dev_err(dev, "no offset in %s\n", key);
>>> -		return -EINVAL;
>>> -	}
>>> +		syscon_np = of_parse_phandle(node, "qcom,ipc", 0);
>>> +		if (!syscon_np) {
>>> +			dev_err(dev, "no qcom,ipc node\n");
>>> +			return -ENODEV;
>>> +		}
>>>  
>>> -	ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
>>> -	if (ret < 0) {
>>> -		dev_err(dev, "no bit in %s\n", key);
>>> -		return -EINVAL;
>>> +		edge->ipc_regmap = syscon_node_to_regmap(syscon_np);
>>> +		if (IS_ERR(edge->ipc_regmap))
>>> +			return PTR_ERR(edge->ipc_regmap);
>>> +
>>> +		key = "qcom,ipc";
>>> +		ret = of_property_read_u32_index(node, key, 1, &edge->ipc_offset);
>>> +		if (ret < 0) {
>>> +			dev_err(dev, "no offset in %s\n", key);
>>> +			return -EINVAL;
>>> +		}
>>> +
>>> +		ret = of_property_read_u32_index(node, key, 2, &edge->ipc_bit);
>>> +		if (ret < 0) {
>>> +			dev_err(dev, "no bit in %s\n", key);
>>> +			return -EINVAL;
>>> +		}
>>>  	}
>>>  
>>>  	ret = of_property_read_string(node, "label", &edge->name);
>>> @@ -1452,6 +1478,8 @@ struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
>>>  	return edge;
>>>  
>>>  unregister_dev:
>>> +	if (!IS_ERR_OR_NULL(edge->mbox_chan))
>>> +		mbox_free_channel(edge->mbox_chan);
>>>  	put_device(&edge->dev);
>>>  	return ERR_PTR(ret);
>>>  }
>>> @@ -1480,6 +1508,7 @@ int qcom_smd_unregister_edge(struct qcom_smd_edge *edge)
>>>  	if (ret)
>>>  		dev_warn(&edge->dev, "can't remove smd device: %d\n", ret);
>>>  
>>> +	mbox_free_channel(edge->mbox_chan);
>>>  	device_unregister(&edge->dev);
>>>  
>>>  	return 0;
>>>
>>
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux