Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 29, 2018 at 11:39:12AM +0200, Daniel Lezcano wrote:
> On 18/07/2018 09:49, Amit Kucheria wrote:
> > One thermal zone per cpu is defined
> 
> The thermal zones are very close, especially when the CPUs belong to the
> same 'cluster'. Very likely the temperature will propagate from one core
> to another core, so when one core reaches the trip0, there is good
> chance the other cores will be close and cross the trip0 threshold too.
> 
> Having multiple thermal zones, one per CPU, may trigger an interrupts
> storm with the passive polling timer delay.
> 
> Does this board have a cooling device per CPU also ?

The cpufreq driver is still under development:
https://lore.kernel.org/patchwork/patch/966833/ . It currently doesn't
register cooling devices, but since CPUs from a 'cluster' use the same
cpufreq policy I think there will be one cooling device per 'cluster'.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux