[PATCH v2 06/11] thermal: tsens: Rename map field in order to add a second address map

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The TSENS driver currently only uses a limited set of registers from the TM
address space. So it was ok to map just that set of registers and call it
"map".

We'd now like to map a second set: SROT registers to introduce new
functionality. Rename the "map" field to a more appropriate "tm_map".

The 8960 doesn't have a clear split between TM and SROT registers. To avoid
complicating the data structure, it will switchover to using tm_map for its
maps.

There is no functional change with this patch.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
 drivers/thermal/qcom/tsens-8960.c   | 30 ++++++++++++++---------------
 drivers/thermal/qcom/tsens-common.c | 17 ++++++++--------
 drivers/thermal/qcom/tsens-v2.c     |  6 +++---
 drivers/thermal/qcom/tsens.h        |  2 +-
 4 files changed, 27 insertions(+), 28 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 4af76de7dc2e..0f0adb302a7b 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -60,7 +60,7 @@ static int suspend_8960(struct tsens_device *tmdev)
 {
 	int ret;
 	unsigned int mask;
-	struct regmap *map = tmdev->map;
+	struct regmap *map = tmdev->tm_map;
 
 	ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
 	if (ret)
@@ -85,7 +85,7 @@ static int suspend_8960(struct tsens_device *tmdev)
 static int resume_8960(struct tsens_device *tmdev)
 {
 	int ret;
-	struct regmap *map = tmdev->map;
+	struct regmap *map = tmdev->tm_map;
 
 	ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
 	if (ret)
@@ -117,12 +117,12 @@ static int enable_8960(struct tsens_device *tmdev, int id)
 	int ret;
 	u32 reg, mask;
 
-	ret = regmap_read(tmdev->map, CNTL_ADDR, &reg);
+	ret = regmap_read(tmdev->tm_map, CNTL_ADDR, &reg);
 	if (ret)
 		return ret;
 
 	mask = BIT(id + SENSOR0_SHIFT);
-	ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST);
+	ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg | SW_RST);
 	if (ret)
 		return ret;
 
@@ -131,7 +131,7 @@ static int enable_8960(struct tsens_device *tmdev, int id)
 	else
 		reg |= mask | SLP_CLK_ENA_8660 | EN;
 
-	ret = regmap_write(tmdev->map, CNTL_ADDR, reg);
+	ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg);
 	if (ret)
 		return ret;
 
@@ -148,7 +148,7 @@ static void disable_8960(struct tsens_device *tmdev)
 	mask <<= SENSOR0_SHIFT;
 	mask |= EN;
 
-	ret = regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
+	ret = regmap_read(tmdev->tm_map, CNTL_ADDR, &reg_cntl);
 	if (ret)
 		return;
 
@@ -159,7 +159,7 @@ static void disable_8960(struct tsens_device *tmdev)
 	else
 		reg_cntl &= ~SLP_CLK_ENA_8660;
 
-	regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+	regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
 }
 
 static int init_8960(struct tsens_device *tmdev)
@@ -167,8 +167,8 @@ static int init_8960(struct tsens_device *tmdev)
 	int ret, i;
 	u32 reg_cntl;
 
-	tmdev->map = dev_get_regmap(tmdev->dev, NULL);
-	if (!tmdev->map)
+	tmdev->tm_map = dev_get_regmap(tmdev->dev, NULL);
+	if (!tmdev->tm_map)
 		return -ENODEV;
 
 	/*
@@ -184,14 +184,14 @@ static int init_8960(struct tsens_device *tmdev)
 	}
 
 	reg_cntl = SW_RST;
-	ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
+	ret = regmap_update_bits(tmdev->tm_map, CNTL_ADDR, SW_RST, reg_cntl);
 	if (ret)
 		return ret;
 
 	if (tmdev->num_sensors > 1) {
 		reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
 		reg_cntl &= ~SW_RST;
-		ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
+		ret = regmap_update_bits(tmdev->tm_map, CONFIG_ADDR,
 					 CONFIG_MASK, CONFIG);
 	} else {
 		reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16);
@@ -200,12 +200,12 @@ static int init_8960(struct tsens_device *tmdev)
 	}
 
 	reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
-	ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+	ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
 	if (ret)
 		return ret;
 
 	reg_cntl |= EN;
-	ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
+	ret = regmap_write(tmdev->tm_map, CNTL_ADDR, reg_cntl);
 	if (ret)
 		return ret;
 
@@ -252,12 +252,12 @@ static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp)
 
 	timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
 	do {
-		ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
+		ret = regmap_read(tmdev->tm_map, INT_STATUS_ADDR, &trdy);
 		if (ret)
 			return ret;
 		if (!(trdy & TRDY_MASK))
 			continue;
-		ret = regmap_read(tmdev->map, s->status, &code);
+		ret = regmap_read(tmdev->tm_map, s->status, &code);
 		if (ret)
 			return ret;
 		*temp = code_to_mdegC(code, s);
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 303e3fdaca98..0585084630b3 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -99,8 +99,7 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 	int last_temp = 0, ret;
 
 	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
-	ret = regmap_read(tmdev->map, status_reg, &code);
-
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;
@@ -118,7 +117,7 @@ static const struct regmap_config tsens_config = {
 
 int __init init_common(struct tsens_device *tmdev)
 {
-	void __iomem *base;
+	void __iomem *tm_base;
 	struct resource *res;
 	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
@@ -134,13 +133,13 @@ int __init init_common(struct tsens_device *tmdev)
 	}
 
 	res = platform_get_resource(op, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&op->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	tm_base = devm_ioremap_resource(&op->dev, res);
+	if (IS_ERR(tm_base))
+		return PTR_ERR(tm_base);
 
-	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-	if (IS_ERR(tmdev->map))
-		return PTR_ERR(tmdev->map);
+	tmdev->tm_map = devm_regmap_init_mmio(tmdev->dev, tm_base, &tsens_config);
+	if (IS_ERR(tmdev->tm_map))
+		return PTR_ERR(tmdev->tm_map);
 
 	return 0;
 }
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 44da02f594ac..1bdef92e4521 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -21,7 +21,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 	int ret;
 
 	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
-	ret = regmap_read(tmdev->map, status_reg, &code);
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & LAST_TEMP_MASK;
@@ -29,7 +29,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 		goto done;
 
 	/* Try a second time */
-	ret = regmap_read(tmdev->map, status_reg, &code);
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -40,7 +40,7 @@ static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 	}
 
 	/* Try a third/last time */
-	ret = regmap_read(tmdev->map, status_reg, &code);
+	ret = regmap_read(tmdev->tm_map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 8207610f326a..58e98c4d3a8b 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -69,7 +69,7 @@ struct tsens_context {
 struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
-	struct regmap			*map;
+	struct regmap			*tm_map;
 	u32				tm_offset;
 	struct tsens_context		ctx;
 	const struct tsens_ops		*ops;
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux