On Mon 27 Aug 09:56 PDT 2018, Lina Iyer wrote:
> On Sun, Aug 26 2018 at 08:33 -0600, Linus Walleij wrote:
> > On Fri, Aug 17, 2018 at 6:39 PM Lina Iyer <ilina@xxxxxxxxxxxxxx> wrote:
> >
> > > QCOM SoC's that have Power Domain Controller (PDC) chip in the always-on
> > > domain can wakeup the SoC, when interrupts and GPIOs are routed to the
> > > its interrupt controller. Only select GPIOs that are deemed wakeup
> > > capable are routed to specific PDC pins. During low power state, the
> > > pinmux interrupt controller may be non-functional but the PDC would be.
> > > The PDC can detect the wakeup GPIO is triggered and bring the TLMM to an
> > > operational state.
> > >
> > > Interrupts that are level triggered will be detected at the TLMM when
> > > the controller becomes operational. Edge interrupts however need to be
> > > replayed again.
> > >
> > > Request the corresponding PDC IRQ, when the GPIO is requested as an IRQ,
> > > but keep it disabled. During suspend, we can enable the PDC IRQ instead
> > > of the GPIO IRQ, which may or not be detected.
> > >
> > > Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
> > > ---
> > > Changes in v1:
> > > - Trigger GPIO in h/w from PDC IRQ handler
> > > - Avoid big tables for GPIO-PDC map, pick from DT instead
> > > - Use handler_data
> >
> > Just for the record this is an impressive and much needed patch
> > set, no other SoC developer has yet taken on the task of making this
> > work so I very much appreciate that Qualcomm show the way.
> >
> > > +static int msm_gpio_pdc_pin_request(struct irq_data *d)
> > > +static int msm_gpio_pdc_pin_release(struct irq_data *d)
> > > +static int msm_gpio_irq_reqres(struct irq_data *d)
> > > +{
> > (...)
> > > + if (gpiochip_lock_as_irq(gc, irqd_to_hwirq(d))) {
> > (...)
> > > +static void msm_gpio_irq_relres(struct irq_data *d)
> > > +{
> > > + gpiochip_unlock_as_irq(gc, irqd_to_hwirq(d));
> > > +}
> >
> > FYI Hans Verkuil is working on a patch set that moves the
> > lock/unlock as IRQ call to the irqchip request() and release()
> > functions so we can switch a GPIO irqchip line from IRQ
> > mode to say output at runtime without too much trouble.
> > (CEC needs this.)
> >
> Thanks, I will look into Hans's RFCv2. But what would help me would be
> to avoid creating the IRQ for the GPIO itself (I have the latent IRQ),
> if I could just return that instead in gpio_to_irq(), it might be
> easier. I understand ->to_irq() is supposed to be a translate function
> only, I can avoid the dance of enabling and diabling the PDC IRQ on
> suspend and resume.
>
I did implement gpio_to_irq() like this in the PMIC gpio/mpp drivers and
we've since concluded that we need to move this to some hierarchical
interrupt controller, because people like Linus expect to be able to say
interrupts = <&gpio_controller 1 IRQ_TYPE_EDGE_RISING>
which is something used all over the place with the TLMM driver today.
Regards,
Bjorn
