On Thu 16 Aug 13:06 PDT 2018, Stephen Boyd wrote:
> We rely on devices to use pinmuxing configurations in DT to select the
> GPIO function (function 0) if they're going to use the gpio in GPIO
> mode. Let's simplify things for driver authors by implementing
> gpio_request_enable() for this pinctrl driver to mux out the GPIO
> function when the gpio is use from gpiolib.
>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Doug Anderson <dianders@xxxxxxxxxxxx>
> Signed-off-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> drivers/pinctrl/qcom/pinctrl-msm.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
> index 5d72ffad32c2..793504057ad0 100644
> --- a/drivers/pinctrl/qcom/pinctrl-msm.c
> +++ b/drivers/pinctrl/qcom/pinctrl-msm.c
> @@ -176,11 +176,27 @@ static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
> return 0;
> }
>
> +static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
> + struct pinctrl_gpio_range *range,
> + unsigned offset)
> +{
> + struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> + const struct msm_pingroup *g = &pctrl->soc->groups[offset];
> +
> + /* No funcs? Probably ACPI so can't do anything here */
> + if (!g->nfuncs)
> + return 0;
> +
> + /* For now assume function 0 is GPIO because it always is */
> + return msm_pinmux_set_mux(pctldev, 0, offset);
> +}
> +
> static const struct pinmux_ops msm_pinmux_ops = {
> .request = msm_pinmux_request,
> .get_functions_count = msm_get_functions_count,
> .get_function_name = msm_get_function_name,
> .get_function_groups = msm_get_function_groups,
> + .gpio_request_enable = msm_pinmux_request_gpio,
> .set_mux = msm_pinmux_set_mux,
> };
>
> --
> Sent by a computer through tubes
>
