Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-mtp: Add nodes for USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Douglas Anderson (2018-08-22 10:36:29)
> Set the various nodes to "okay" and hook up the regulators.
> 
> NOTE: For now the main USB port (the one that goes out the Type C
> connector) is forced to host.  Eventually someone will need to get the
> Type C detection hooked up and get this all integrated with the
> PMI8998 PMIC.  The reason for forcing to "host" in the meantime is
> that this will leave us with one "host" and one "peripheral" port.
> 
> In order for host mode this to work, we assume that the bootloader
> left things configured enough for us.  Apparently the magic for that
> is is to do these writes on pmi8998:
> - pm_comm_write_byte(2, 0x1153, 0x2C, 0);
> - pm_comm_write_byte(2, 0x1152, 0x07, 0);
> - pm_comm_write_byte(2, 0x1140, 0x00, 0);
> - pm_comm_write_byte(2, 0x1140, 0x01, 0);
> 
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---

Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux