Re: [PATCH 2/3] arm64: dts: qcom: sdm845-mtp: Add RPMh VRM/XOB regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, Aug 20, 2018 at 11:18 AM, Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
> Quoting Douglas Anderson (2018-08-10 14:51:49)
>> @@ -20,6 +21,450 @@
>>         chosen {
>>                 stdout-path = "serial0:115200n8";
>>         };
>> +
>> +       vph_pwr: vph-pwr-regulator {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vph_pwr";
>> +               regulator-min-microvolt = <3700000>;
>> +               regulator-max-microvolt = <3700000>;
>> +       };
>> +
>> +       /*
>> +        * Apparently RPMh does not provide support for PM8998 S4 because it
>> +        * is always-on; model it as a fixed regulator.
>> +        */
>> +       vreg_s4a_1p8: pm8998-smps4 {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vreg_s4a_1p8";
>> +
>> +               regulator-min-microvolt = <1800000>;
>> +               regulator-max-microvolt = <1800000>;
>> +
>> +               regulator-always-on;
>> +               regulator-boot-on;
>
> Can vin be vph_pwr? That would properly model this.

Yes, good suggestion.  Fixed in v3.

-Doug



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux