Instead of showing up as thermal-sensor@<addr>, the nodes will show up as tsens0_tm, tsen1_tm, tsens1_srot, etc. in /proc/iomem making it easier to read. IOW, 0c222000-0c2221fe : thermal-sensor@c263000 0c223000-0c2231fe : thermal-sensor@c265000 0c263000-0c2631fe : thermal-sensor@c263000 0c265000-0c2651fe : thermal-sensor@c265000 becomes 0c222000-0c2221fe : tsens0_srot 0c223000-0c2231fe : tsens1_srot 0c263000-0c2631fe : tsens0_tm 0c265000-0c2651fe : tsens1_tm Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 ++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++ 4 files changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 3c4b81c29798..64c9f81ddd90 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -431,6 +431,7 @@ compatible = "qcom,msm8974-tsens"; reg = <0xfc4a9000 0x1000>, /* TM */ <0xfc4a8000 0x1000>; /* SROT */ + reg-names = "tsens_tm", "tsens_srot"; nvmem-cells = <&tsens_calib>, <&tsens_backup>; nvmem-cell-names = "calib", "calib_backup"; #qcom,sensors = <11>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index abf84df5a7bc..4e6a5e462a91 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -778,6 +778,7 @@ compatible = "qcom,msm8916-tsens"; reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ + reg-names = "tsens_tm", "tsens_srot"; nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; nvmem-cell-names = "calib", "calib_sel"; #qcom,sensors = <5>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c2dca3a30091..7e5982daa2ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -969,6 +969,7 @@ compatible = "qcom,msm8996-tsens"; reg = <0x4a9000 0x1000>, /* TM */ <0x4a8000 0x1000>; /* SROT */ + reg-names = "tsens0_tm", "tsens0_srot"; #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; @@ -977,6 +978,7 @@ compatible = "qcom,msm8996-tsens"; reg = <0x4ad000 0x1000>, /* TM */ <0x4ac000 0x1000>; /* SROT */ + reg-names = "tsens1_tm", "tsens1_srot"; #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index f722785df26b..efd5d7abd1cd 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1531,6 +1531,7 @@ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; reg = <0xc263000 0x1ff>, /* TM */ <0xc222000 0x1ff>; /* SROT */ + reg-names = "tsens0_tm", "tsens0_srot"; #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; @@ -1539,6 +1540,7 @@ compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; reg = <0xc265000 0x1ff>, /* TM */ <0xc223000 0x1ff>; /* SROT */ + reg-names = "tsens1_tm", "tsens1_srot"; #qcom,sensors = <8>; #thermal-sensor-cells = <1>; }; -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
