Hi, This series adds support for Qualcomm Camera Control Interface (CCI) I2C controller. This block contains one/two I2C masters and registers these adapters based on the controller probed on. Changes in v3: - Update DT binding per RobH comments - Add the subnode for bus instances - Move all compataible data to driver data - add num_master data and use that to register and use masters Changes in v2: - Add support for two adapters Todor Tomov (2): dt-bindings: i2c: Add binding for Qualcomm CCI I2C controller i2c: Add Qualcomm CCI I2C driver .../devicetree/bindings/i2c/i2c-qcom-cci.txt | 55 ++ drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-qcom-cci.c | 814 +++++++++++++++++++++ 4 files changed, 880 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt create mode 100644 drivers/i2c/busses/i2c-qcom-cci.c -- 2.14.4 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
