Re: [PATCH] drm/msm/adreno/a6xx: Set the GPU frequency after turning on the GMU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 3, 2018 at 5:06 PM Jordan Crouse <jcrouse@xxxxxxxxxxxxxx> wrote:
>
> Set the correct initial GPU frequency on the GMU just after turning on
> or resetting the GMU so it doesn't keep running at a horribly slow
> speed.
>
> Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>


*much* better :-)

Tested-by: Rob Clark <robdclark@xxxxxxxxx>

> ---
>  drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> index c49ca275a3b3..f8227f38b8cd 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c
> @@ -65,6 +65,26 @@ static bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu)
>                 A6XX_GMU_SPTPRAC_PWR_CLK_STATUS_GX_HM_CLK_OFF));
>  }
>
> +static int a6xx_gmu_set_freq(struct a6xx_gmu *gmu, int index)
> +{
> +       gmu_write(gmu, REG_A6XX_GMU_DCVS_ACK_OPTION, 0);
> +
> +       gmu_write(gmu, REG_A6XX_GMU_DCVS_PERF_SETTING,
> +               ((index << 24) & 0xff) | (3 & 0xf));
> +
> +       /*
> +        * Send an invalid index as a vote for the bus bandwidth and let the
> +        * firmware decide on the right vote
> +        */
> +       gmu_write(gmu, REG_A6XX_GMU_DCVS_BW_SETTING, 0xff);
> +
> +       /* Set and clear the OOB for DCVS to trigger the GMU */
> +       a6xx_gmu_set_oob(gmu, GMU_OOB_DCVS_SET);
> +       a6xx_gmu_clear_oob(gmu, GMU_OOB_DCVS_SET);
> +
> +       return gmu_read(gmu, REG_A6XX_GMU_DCVS_RETURN);
> +}
> +
>  static bool a6xx_gmu_check_idle_level(struct a6xx_gmu *gmu)
>  {
>         u32 val;
> @@ -602,6 +622,9 @@ int a6xx_gmu_reset(struct a6xx_gpu *a6xx_gpu)
>         if (!ret)
>                 ret = a6xx_hfi_start(gmu, GMU_COLD_BOOT);
>
> +       /* Set the GPU back to the highest power frequency */
> +       a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
> +
>         if (ret)
>                 a6xx_gmu_clear_oob(gmu, GMU_OOB_BOOT_SLUMBER);
>
> @@ -635,6 +658,9 @@ int a6xx_gmu_resume(struct a6xx_gpu *a6xx_gpu)
>
>         ret = a6xx_hfi_start(gmu, status);
>
> +       /* Set the GPU to the highest power frequency */
> +       a6xx_gmu_set_freq(gmu, gmu->nr_gpu_freqs - 1);
> +
>  out:
>         /* Make sure to turn off the boot OOB request on error */
>         if (ret)
> --
> 2.18.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux