Re: [PATCH v8 1/2] i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 30, 2018 at 11:23:51AM -0600, Karthikeyan Ramasubramanian wrote:
> This bus driver supports the GENI based i2c hardware controller in the
> Qualcomm SOCs. The Qualcomm Generic Interface (GENI) is a programmable
> module supporting a wide range of serial interfaces including I2C. The
> driver supports FIFO mode and DMA mode of transfer and switches modes
> dynamically depending on the size of the transfer.
> 
> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
> Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> Tested-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>

Applied to for-next, thanks!

As discussed, I squashed the MAINTAINER addition and the RPM fix by Evan
into this commit. Please check later that I resolved the conflict
correctly (once I pushed out).

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux