Hi Vinod, On Tue, Jul 31, 2018 at 10:18:07AM +0530, Vinod Koul wrote: > Since handling is abstracted in this driver, we need to add resin entry > in id table along with pwrkey_data. > > Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> I added "qcom,pm8941-resin" to the binding doc and applied. Thank you. > --- > drivers/input/misc/pm8941-pwrkey.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c > index 2047e34c0982..6547a57f5222 100644 > --- a/drivers/input/misc/pm8941-pwrkey.c > +++ b/drivers/input/misc/pm8941-pwrkey.c > @@ -29,6 +29,7 @@ > > #define PON_RT_STS 0x10 > #define PON_KPDPWR_N_SET BIT(0) > +#define PON_RESIN_N_SET BIT(1) > > #define PON_PS_HOLD_RST_CTL 0x5a > #define PON_PS_HOLD_RST_CTL2 0x5b > @@ -39,6 +40,7 @@ > > #define PON_PULL_CTL 0x70 > #define PON_KPDPWR_PULL_UP BIT(1) > +#define PON_RESIN_PULL_UP BIT(0) > > #define PON_DBC_CTL 0x71 > #define PON_DBC_DELAY_MASK 0x7 > @@ -306,8 +308,14 @@ static const struct pm8941_data pwrkey_data = { > .status_bit = PON_KPDPWR_N_SET, > }; > > +static const struct pm8941_data resin_data = { > + .pull_up_bit = PON_RESIN_PULL_UP, > + .status_bit = PON_RESIN_N_SET, > +}; > + > static const struct of_device_id pm8941_pwr_key_id_table[] = { > { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data }, > + { .compatible = "qcom,pm8941-resin", .data = &resin_data }, > { } > }; > MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table); > -- > 2.14.4 > -- Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html