[PATCH v1 2/3] thermal: tsens: switch from of_iomap() to devm_ioremap_resource()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



devm_ioremap_resources() automatically requests resources (so that the I/O
region shows up in /proc/iomem) and devm_ wrappers do better error handling
and unmapping of the I/O region when needed.

Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
 drivers/thermal/qcom/tsens-common.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 25e7f24..6207d8d 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -127,13 +127,11 @@ static const struct regmap_config tsens_config = {
 int __init init_common(struct tsens_device *tmdev)
 {
 	void __iomem *base;
+	struct resource *res;
 	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
 	if (!op)
 		return -EINVAL;
-	base = of_iomap(tmdev->dev->of_node, 0);
-	if (!base)
-		return -EINVAL;
 
 	/* The driver only uses the TM register address space for now */
 	if (op->num_resources > 1) {
@@ -143,11 +141,14 @@ int __init init_common(struct tsens_device *tmdev)
 		tmdev->tm_offset = 0x1000;
 	}
 
+	res = platform_get_resource(op, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&op->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
 	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-	if (IS_ERR(tmdev->map)) {
-		iounmap(base);
+	if (IS_ERR(tmdev->map))
 		return PTR_ERR(tmdev->map);
-	}
 
 	return 0;
 }
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux