Re: [PATCH v4 2/3] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 17, 2018 at 02:08:14PM -0700, Matthias Kaehlcke wrote:
> This adds the spmi-temp-alarm node to pm8998 based on the examples in the
> bindings.
> 
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

I should have added:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

> ---
> Changes in v4:
> - none
> 
> Changes in v3:
> - changed node name from 'qcom,temp-alarm@2400' to 'temp-alarm@2400'
> - removed controller register length value from 'reg'
> 
> Changes in v2:
> - none
> ---
>  arch/arm64/boot/dts/qcom/pm8998.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 92bed1e7d4bb..7eea94701b23 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -11,6 +11,13 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		pm8998_temp: temp-alarm@2400 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0x2400>;
> +			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
> +			#thermal-sensor-cells = <0>;
> +		};
> +
>  		pm8998_gpio: gpios@c000 {
>  			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux