modesetting X11 driver may provide negative x/y cordinates in
mdp5_crtc_cursor_move call when rotation is enabled.
Cursor buffer can overlap down to its negative width/height.
ROI has to be recalculated for negative x/y indicating using the
lower/right corner of the cursor buffer and hotspot must be set
in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X.
Signed-off-by: Carsten Behling <carsten.behling@xxxxxxxxx>
---
Changes in v2:
- fixed format specifier in debug message
drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 51 ++++++++++++++++++++++++++-----
1 file changed, 43 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
index 10271359789e..a7f4a6688fec 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c
@@ -65,7 +65,7 @@ struct mdp5_crtc {
struct drm_gem_object *scanout_bo;
uint64_t iova;
uint32_t width, height;
- uint32_t x, y;
+ int x, y;
} cursor;
};
#define to_mdp5_crtc(x) container_of(x, struct mdp5_crtc, base)
@@ -760,20 +760,31 @@ static void get_roi(struct drm_crtc *crtc, uint32_t *roi_w, uint32_t *roi_h)
* Cursor Region Of Interest (ROI) is a plane read from cursor
* buffer to render. The ROI region is determined by the visibility of
* the cursor point. In the default Cursor image the cursor point will
- * be at the top left of the cursor image, unless it is specified
- * otherwise using hotspot feature.
+ * be at the top left of the cursor image.
*
+ * Without rotation:
* If the cursor point reaches the right (xres - x < cursor.width) or
* bottom (yres - y < cursor.height) boundary of the screen, then ROI
* width and ROI height need to be evaluated to crop the cursor image
* accordingly.
* (xres-x) will be new cursor width when x > (xres - cursor.width)
* (yres-y) will be new cursor height when y > (yres - cursor.height)
+ *
+ * With rotation:
+ * We get negative x and/or y coordinates.
+ * (cursor.width - abs(x)) will be new cursor width when x < 0
+ * (cursor.height - abs(y)) will be new cursor width when y < 0
*/
- *roi_w = min(mdp5_crtc->cursor.width, xres -
+ if (mdp5_crtc->cursor.x >= 0)
+ *roi_w = min(mdp5_crtc->cursor.width, xres -
mdp5_crtc->cursor.x);
- *roi_h = min(mdp5_crtc->cursor.height, yres -
+ else
+ *roi_w = mdp5_crtc->cursor.width - abs(mdp5_crtc->cursor.x);
+ if (mdp5_crtc->cursor.y >= 0)
+ *roi_h = min(mdp5_crtc->cursor.height, yres -
mdp5_crtc->cursor.y);
+ else
+ *roi_h = mdp5_crtc->cursor.height - abs(mdp5_crtc->cursor.y);
}
static void mdp5_crtc_restore_cursor(struct drm_crtc *crtc)
@@ -783,7 +794,7 @@ static void mdp5_crtc_restore_cursor(struct drm_crtc *crtc)
struct mdp5_kms *mdp5_kms = get_kms(crtc);
const enum mdp5_cursor_alpha cur_alpha = CURSOR_ALPHA_PER_PIXEL;
uint32_t blendcfg, stride;
- uint32_t x, y, width, height;
+ uint32_t x, y, src_x, src_y, width, height;
uint32_t roi_w, roi_h;
int lm;
@@ -800,6 +811,26 @@ static void mdp5_crtc_restore_cursor(struct drm_crtc *crtc)
get_roi(crtc, &roi_w, &roi_h);
+ /* If cusror buffer overlaps due to rotation on the
+ * upper or left screen border the pixel offset inside
+ * the cursor buffer of the ROI is the positive overlap
+ * distance.
+ */
+ if (mdp5_crtc->cursor.x < 0) {
+ src_x = abs(mdp5_crtc->cursor.x);
+ x = 0;
+ } else {
+ src_x = 0;
+ }
+ if (mdp5_crtc->cursor.y < 0) {
+ src_y = abs(mdp5_crtc->cursor.y);
+ y = 0;
+ } else {
+ src_y = 0;
+ }
+ DBG("%s: x=%u, y=%u roi_w=%u roi_h=%u src_x=%u src_y=%u",
+ crtc->name, x, y, roi_w, roi_h, src_x, src_y);
+
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_STRIDE(lm), stride);
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_FORMAT(lm),
MDP5_LM_CURSOR_FORMAT_FORMAT(CURSOR_FMT_ARGB8888));
@@ -812,6 +843,9 @@ static void mdp5_crtc_restore_cursor(struct drm_crtc *crtc)
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_START_XY(lm),
MDP5_LM_CURSOR_START_XY_Y_START(y) |
MDP5_LM_CURSOR_START_XY_X_START(x));
+ mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_XY(lm),
+ MDP5_LM_CURSOR_XY_SRC_Y(src_y) |
+ MDP5_LM_CURSOR_XY_SRC_X(src_x));
mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BASE_ADDR(lm),
mdp5_crtc->cursor.iova);
@@ -932,8 +966,9 @@ static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
if (unlikely(!crtc->state->enable))
return 0;
- mdp5_crtc->cursor.x = x = max(x, 0);
- mdp5_crtc->cursor.y = y = max(y, 0);
+ /* accept negative x/y coordinates up to maximum cursor overlap */
+ mdp5_crtc->cursor.x = x = max(x, -(int)mdp5_crtc->cursor.width);
+ mdp5_crtc->cursor.y = y = max(y, -(int)mdp5_crtc->cursor.height);
get_roi(crtc, &roi_w, &roi_h);
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
